700D108911-628 Datasheet, PDF (3/4 Pages) List of Unclassifed Manufacturers – Power Ring Film CapacitorsTM

Power Ring Film Capacitors^TM
SBE Part 700D108911-628
Mechanical Mounting and Additional Thermal Notes:
This capacitor is optimized for extremely low self
inductance when connected to a suitable laminar bus
structure.When so connected, the capacitor is very
rigidly attached to such a structure and thus does not
necessarily need to be mounted to a chassis. However,
the capacitor case can be attached to an application
surface/heat sink, etc. if desired. When so mounted,
the capacitor can be part of the bus structure sup-
port.Use of thermal interface compound between the
capacitor case and application surface/heat sink will
assist with removal of capacitor and bus heat.Note
that the capacitor internal heating is VERY small, and
other bus structure heat sources are very likely
significantly higher than the heat added to the bus by
the capacitor.Capacitor dissipation is approximately
7.5W at 207Arms, from 1-100KHz.It is highly recom-
mended to use infrared thermal imaging from a system
cold start to determine the location and relative mag-
nitude of thermal input to the bus.The capacitor may
well function as a thermal conduit for bus structure
heat, and it will be very possible that the capacitor
internal hot spot is less than the terminal temperature.
Thermal contour maps are available for some repre-
sentative conditions.
Layout Details:
REV.
01
7X 45.0°
DESCRIPTION
Initial Release
Revisions
CHG CHK APR
BY BY BY
-
-
-
DATE
-
8.494
Bolt Circle
C
16X M5X0.8 - 6H THRU
28 in-lbs MAX Torque
.020 A B C
A
10.000
10.321
Bolt Circle
B
10.945
Bolt Circle
.259 1.000
Accepts 1/4" Plastite Screw
40 in-lbs MAX Torque
.663
4X .197±.005 THRU ALL
.020 A B C
(Accepts 1/4" Plastite Screw)
(40 in-lbs MAX Torque)
A
.040
16 Surfaces
.221
2.721
DETAIL A
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF SBE. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF SBE IS PROHIBITED.
MATERIAL
1.000
.500
.280
NON-TOLERANCED DIMENSIONS ARE BASIC
.030 A B C
UNLESS OTHERWISE SPECIFIED:
ALL DIMENSIONS ARE IN INCHES
SBE, INC.
81 PARKER ROAD
BARRE, VT 05641 USA
802.476.4146 FAX: [phone]
GEOMETRIC TOLERANCING PER: Y14.5-2009
DRAWN
MGS 8/7/2013
CHECKED
AGH
8/8/2013
ENG APPR.
FINISH
MSB
8/8/2013
TITLE
Power Ring Film Capacitor,
1000µF, 1100VDC
DWG. NO.
700D628LV
DO NOT SCALE DRAWING ^SIZE A ^REV 01 SHEET 1 OF 1
SBE reserves the right to amend design data
At the Leading Edge of Film Capacitor Technology®