CLG04P050L28 Datasheet, PDF (26/26 Pages) List of Unclassifed Manufacturers – Super Capacitors To Improve Power Performance.

Handling Cautions
1) Do not apply more than rated voltage.
If you apply more than rated voltage, Cellergy electrolyte will be elec-
trolyzed and the super capacitors ESR may increase.
2) Do not use Cellergy for ripple absorption.
3) Operating temperature and life
Generally, Cellergy has a lower leakage current, longer back-up time
and longer life in the low temperature range i.e. the room temperature.
It will have a higher leakage current and a shorter life at elevated tem-
peratures.
Please design the Cellergy such that is not adjacent to heat emitting
elements.
4) Short-circuit Cellergy
You can short-circuit between terminals of Cellergy without a resistor.
However when you short-circuit frequently, please consult us.
5) Storage
In long term storage, please store Cellergy in following condition;
1) TEMP. : 15 ~ 25 °C
2) HUMIDITY: 45 ~ 75 %RH
3) NON-DUST
6) Do not disassemble Cellergy. It contains electrolyte.
7) The tips of Cellergy terminals are very sharp. Please handle with care.
8) Reflow process is not recommended for Cellergy capacitors.
Note
The Cellergy EDLC is a water based component. Extended use of the EDLC at elevated
temperatures may cause evaporation of water leading to ESR increase.
26
Revision: 21-3-10
Subject to change without notice