USB2-H-5002 Datasheet, PDF (23/30 Pages) List of Unclassifed Manufacturers – USB2-H-5002 Hi-Speed USB to 2-Port RS485 Adapter

Document Reference No.: ES_000020
USB2-H-5002 Hi-Speed USB to 2-Port RS485 Adapter Data Sheet
Version 1.2
Clearance No.: ES #21
7 Environmental Approvals & Declarations
7.1 EMI Compatibility
FCC and CE
The USB2-H-5002 has been tested to be compliant with both FCC Part 15 Subpart B and European EMC
Directive.
NOTE: This is a Class B product. In a domestic environment, this product may cause radio interference,
in which case the user may be required to take adequate measures.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
7.2 Safety
The USB2-H-5002 is defined as Limited Power Supply (LPS) device, with operating voltages under
60VDC.
7.3 Environmental
The USB2-H-5002 is a lead-free device that complies with the following environmental directives: RoHS,
WEEE, REACH, PFOS and DecaBDE.
7.4 Reliability
The USB2-H-5002 is designed as a robust USB-Serial adapter for use in many environments. There are
no user-serviceable parts. Any failure will require a replacement of the unit.
7.4.1 MTTF
The Mean Time To Failure is calculated at TBD hours.
©2010 EasySync Ltd.
23