NT-43F0-0424 Datasheet, PDF (23/27 Pages) List of Unclassifed Manufacturers – LED Light Engines

Mechanical Dimensions
RGB (NT-43F0-0424)
Figure10b.
All dimensions are for reference only. Do
not handle device by the lens. Care must
be taken to avoid damage to the lens.
Drawing not to scale.
Units: Inches [millimeters]
Solder Pad Design
Electrical Connections
Warm White (NT-42D1-0425) and Daylight White (NT-42D0-0426)
©2008 Lamina Lighting Incorporated
Atlas^TM Series LED Light Engines FM-0167 Rev 05.21.08
Figure 11.
For optimal thermal performance thermal
grease or epoxy should be added beneath
the entire surface of the LED array. All
dimensions are for reference only.
Units: Inches [millimeters]
Thermal Design
Proper thermal design is essential to
achieving maximum life and performance.
There are many ways you can reduce
the junction temperature of your product
and increase its useful life. Heat sinks,
both active and passive, come in many
styles and sizes. Choosing the correct
heat sink for your design will maximize
the performance and add to the unique
aesthetic quality of your product. Thermal
tape is not recommended for attachment
to heat sinks.
The Thermal Design Experts at Lamina
are ready to assist you with your design.
Visit www.laminalighting.com where you
can download helpful white papers and
get specifications for our other products
including heat sinks, optics and drivers for
the Atlas^TM Series of LED Light Engines.
Figure 12a.
Do not handle device by the lens.
Care must be taken to avoid damage to
the lens. Drawing not to scale.
Units: Inches [millimeters]
23