M170EG01V9 Datasheet, PDF (23/25 Pages) List of Unclassifed Manufacturers – 17.0” SXGA Color TFT-LCD Module

Product Specification
M170EG01 V.9
9.0 Safety
9.1 Sharp Edge Requirements
There will be no sharp edges or comers on the display assembly that could cause injury.
9.2 Materials
9.2.1 Toxicity
There will be no carcinogenic materials used anywhere in the display module. If toxic materials are
used, they will be reviewed and approved by the responsible AUO Toxicologist.
9.2.2 Flammability
All components including electrical components that do not meet the flammability grade UL94-V1 in
the module will complete the flammability rating exception approval process.
The printed circuit board will be made from material rated 94-V1 or better. The actual UL
flammability rating will be printed on the printed circuit board.
9.3 Capacitors
If any polarized capacitors are used in the display assembly, provisions will be made to keep them
from being inserted backwards.
10.0 Other requirement
10.1 National Test Lab Requirement
The display module will satisfy all requirements for compliance to
UL 1950, First Edition
CSA C22.2 No.950-M89
EEC 950
EN 60 950
U.S.A. Information Technology Equipment
Canada, Information Technology Equipment
International, Information Technology Equipment
International, Information Processing Equipment
(European Norm for IEC950)
10.2 Label
The label is on the panel as shown below:
ver0.1
24/25