ZSPM4013 Datasheet, PDF (21/22 Pages) List of Unclassifed Manufacturers – High Efficiency 3A Synchronous Buck Converter

ZSPM4013
High Efficiency 3A Synchronous Buck Converter
9 Document Revision History
Revision
1.00
1.01
1.02
1.10
Date
23-Jan-2012
26-Jan-2012
17-Sep-2012
10-Oct-2012
Description
First release.
Revision to delete note under Table 1.2.
Correction of application circuits. PG can only be connected to VOUT through the optional
resistor.
Correction of specifications for operating voltage supply range in Table 1.3, in Table 1.4,
and on page 2.
Removed reference to “Dissipation Table” in Table 1.1.
Update for Figure 2.6.
Added instructions to connect duplicate pins in the pin description table.
Revised block diagram graphic for block titled “Under and Over Voltage Protection” to read
“Over-Voltage Protection.”
Removed reference to the R code in the part-ordering table in section 6. This option is not
available.
Revised reference to “Figure 2” in section 5.3.8 to refer to Figure 3.2.
Update for contact information.
Sales and Further Information
www.zmdi.com
[e-mail]
Zentrum Mikroelektronik
Dresden AG
Grenzstrasse 28
01109 Dresden
Germany
ZMD America, Inc.
1525 McCarthy Blvd., #212
Milpitas, CA 95035-7453
USA
Phone [phone] Phone 855-ASK-ZMDI
Fax [phone]
(855-275-9634)
Zentrum Mikroelektronik
ZMD FAR EAST, Ltd.
Dresden AG, Japan Office
3F, No. 51, Sec. 2,
2nd Floor, Shinbashi Tokyu Bldg. Keelung Road
4-21-3, Shinbashi, Minato-ku
11052 Taipei
Tokyo, 105-0004
Taiwan
Japan
Phone [phone]
Fax [phone]
Phone [phone]
Fax [phone]
Zentrum Mikroelektronik
Dresden AG, Korea Office
U-space 1 Building
11th Floor, Unit JA-1102
670 Sampyeong-dong
Bundang-gu, Seongnam-si
Gyeonggi-do, 463-400
Korea
Phone [phone]
Fax [phone]
DISCLAIMER: This information applies to a product under development. Its characteristics and specifications are subject to change without notice. Zentrum Mikroelektronik Dresden AG
(ZMD AG) assumes no obligation regarding future manufacture unless otherwise agreed to in writing. The information furnished hereby is believed to be true and accurate. However, under
no circumstances shall ZMD AG be liable to any customer, licensee, or any other third party for any special, indirect, incidental, or consequential damages of any kind or nature whatsoever
arising out of or in any way related to the furnishing, performance, or use of this technical data. ZMD AG hereby expressly disclaims any liability of ZMD AG to any customer, licensee or
any other third party, and any such customer, licensee and any other third party hereby waives any liability of ZMD AG for any damages in connection with or arising out of the furnishing,
performance or use of this technical data, whether based on contract, warranty, tort (including negligence), strict liability, or otherwise.
Data Sheet
October 10, 2012
© 2012 Zentrum Mikroelektronik Dresden AG — Rev. 1.10
All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the
prior written consent of the copyright owner. The information furnished in this publication is subject to changes without notice.
21 of 21