ULCD-70DT Datasheet, PDF (21/22 Pages) List of Unclassifed Manufacturers – 7.0” DIABLO16 Intelligent Display Module

4D SYSTEMS
14. Specifications and Ratings
uLCD-70DT Display Module
ABSOLUTE MAXIMUM RATINGS
Operating ambient temperature ................................................................................................... -15°C to +65°C
Storage temperature .......................................................................................................................... -30°C +70°C
Voltage on any digital input pin with respect to GND ....................................................................... -0.3V to 6.0V
Voltage on VCC with respect to GND ................................................................................................. -0.3V to 6.0V
Maximum current sunk/sourced by any pin .............................................................................................. 10.0mA
Maximum current sunk/sourced by all ports ........................................................................................... 200.0mA
NOTE: Stresses above those listed here may cause permanent damage to the device. This is a stress rating only
and functional operation of the device at those or any other conditions above those indicated in the
recommended operation listings of this specification is not implied. Exposure to maximum rating conditions
for extended periods may affect device reliability.
RECOMMENDED OPERATING CONDITIONS
Parameter
Supply Voltage (VCC)
Operating Temperature
Input Low Voltage (VIL)
Input High Voltage (VIH)
Input High Voltage (VIH)
Reset Pulse
Operational Delay
Conditions
Stable external supply required
3.3V, all pins
3.3V, non 5V tolerant pins
All GPIO pins, RX0 and TX0 pins
External Open Collector
Power-Up or External Reset
Min
Typ
4.0
5.0
-10
--
0
--
0.8VCC --
0.8VCC --
2.0
--
500
--
Max
5.5
+60
0.2VCC
3.3
5.5
--
3000
Units
V
°C
V
V
V
µs
ms
GLOBAL CHARACTERISTICS BASED ON OPERATING CONDITIONS
Parameter
Supply Current (ICC)
Output Low Voltage
(VOL)
Output High Voltage
(VOH)
Capacitive Loading
Flash Memory
Endurance
LCD Backlight Operating
Hours Endurance
Conditions
3.3V, heavily depends on screen usage
conditions, sleep mode
3.3V, IOL = 3.4mA
3.3V, IOL = -2.0mA
All pins
DIABLO16 PmmC Programming
Measured until display is 50% original
brightness, 25 degrees C.
Min
Typ
Max
--
500
--
--
--
0.4
2.4
--
--
--
--
50
--
10000
--
--
30000
--
Units
mA
V
V
pF
E/W
Hours
ORDERING INFORMATION
Order Code: uLCD-70DT
Packaging: Module sealed in an antistatic foam padded 4D Systems box
© 2014 4D SYSTEMS
Page 21 of 22
www.4dsystems.com.au