AX6108 Datasheet, PDF (21/31 Pages) List of Unclassifed Manufacturers – Dot Matrix Liquid Crystal Graphic Display Column Driver

¸ µà ¹Ø ¤q ªl ¥Ñ ¦÷ -³ ¤- ¥½ q
ASLIC MICROELECTRONICS CORP.
Page 21
Display Control Instructions
Outline
Table 2 shows the instructions. Read/write (R/W) signal, data/instruction (D/I) signal, and data bus
signals (DB0 to DB7) are also called instructions because the internal operation depends on the signals
from the MPU.
These explanations are detailed in the following pages. Generally, there are following three kinds of
instructions :
1. Instruction to set addresses in the internal RAM.
2. Instruction to transfer data from/to the internal RAM.
3. Other instructions.
In general use, the second type of instruction is used most frequently. Since Y address of the internal
RAM is increased by 1 automatically after writing (reading) data, the program can be shortened.
During the execution of an instruction, the system cannot accept instructions other than status read
instruction. Send instructions from MPU after making sure that the busy flag is 0, which is proof that
an instruction is not being excuted.
------------------------------------------------------------------------------------------------------------------------
AX6108 Dot Matrix Liquid Crystal Graphic Display Column Driver
------------------------------------------------------------------------------------------------------------------------
SALES BY TITRON INTERNATIONAL CORP.