ULCD-43 Datasheet, PDF (20/21 Pages) List of Unclassifed Manufacturers – 4.3” microLCD PICASO Display

4D SYSTEMS
µLCD-43
16. Specifications and Ratings
ABSOLUTE MAXIMUM RATINGS
Operating ambient temperature ................................................................................................... -15°C to +65°C
Storage temperature .......................................................................................................................... -30°C +70°C
Voltage on any digital input pin with respect to GND ....................................................................... -0.3V to 6.0V
Voltage on SWITCH pin with respect to GND ................................................................................... -0.3V to 6.0V
Voltage on VCC with respect to GND ................................................................................................. -0.3V to 6.0V
NOTE: Stresses above those listed here may cause permanent damage to the device. This is a stress rating only
and functional operation of the device at those or any other conditions above those indicated in the
recommended operation listings of this specification is not implied. Exposure to maximum rating conditions for
extended periods may affect device reliability.
RECOMMENDED OPERATING CONDITIONS
Parameter
Supply Voltage (VCC)
Operating Temperature
Input Low Voltage (VIL)
Input High Voltage (VIH)
Input High Voltage (VIH)
Reset Pulse
Operational Delay
Conditions
VCC = 3.3V, all pins
VCC = 3.3V, non 5V tolerant pins
All GPIO pins, RX0 and TX0 pins
External Open Collector
Power-Up or External Reset
Min
Typ
4.5
5.0
-10
--
VGND
--
0.8VCC --
0.8VCC --
2.0
--
500
--
Max
5.5
+60
0.2VCC
VCC
5.5
--
3000
Units
V
°C
V
V
V
µs
ms
GLOBAL CHARACTERISTICS BASED ON OPERATING CONDITIONS
Parameter
Supply Current (ICC)
Output Low Voltage
(VOL)
Output High Voltage
(VOH)
Capacitive Loading
Flash Memory
Endurance
Display Life
Conditions
VCC = 5.0V, heavily depends on screen
usage conditions, sleep mode
VCC = 5.0V, IOL = 3.4mA
VCC = 5.0V, IOL = -2.0mA
All pins
PICASO PmmC Programming
Typical use
Min
Typ
Max
15
230
300
--
--
0.4
2.4
--
--
--
--
50
--
10000
--
20000
Units
mA
V
V
pF
E/W
Hours
ORDERING INFORMATION
Order Code:
 µLCD-43P – Non Touch
 µLCD-43PT – Resistive Touch (least sensitive, best used with stylus touch)
 µLCD-43PCT – Capacitive Touch (most sensitive, best used with finger touch)
Package: 138mm x 100mm x 30mm
Packaging: Module sealed in antistatic foam padded 4D Systems Box
© 2014 4D SYSTEMS
Page 20 of 21
www.4dsystems.com.au