LAL03NA102K Datasheet, PDF (20/23 Pages) List of Unclassifed Manufacturers – AXIAL LEADED INDUCTORS

RELIABILITY DATAɹ
7/9
Specified Value
Item
LA02 Type/
LA03 Type
LA04 Type
LA05 Type
LHL˘˘˘/
LHF15BB/
LHFP˘˘BB
FBA/FBR
LAV35
FL05˘
Type
FL06BT
Type
Test Method and Remarks
22.Resisitance to solvent
Pleasa avoid the ultrasonic cleaning of
No signifi- P l e a s e
FBD
this product.
cant abnor- avoid the ul-
Solvent temperatureD20V25C
mality in ap- t r a s o n i c
DurationD30M5 sec.
pearance cleaning of
Solvent typeDAcetone, trichloroethylene
Impedance this product.
RecoveryD3hrs of recovery under the standard condition
changeD
WithinM20L
after the test.
5
23.Thermnal shock
˚L/LD ˚L/LD
˚L/LD
AppearanceD AppearanceD ˚L/LD
Refer to
AppearanceD LAD
WithinM10L WithinM10L WithinM10L No abnor- No abnor- WithinM10L individual No abnor- Conditions for 1cycle
QD30min.
˚Q/QD QD15min.
WithinM30L
mality
mality
QD20min.
Inductance Impedance
changeD changeD
WithinM10L WithinM20L
Q changeD
specifica- mality
tion
Impedance
changeD
WithinM20L
Step
1
2
3
4
TemperaturefCg
K25
J0
K3
Room temperature
J85
J2
K0
Room temperature
Durationfming
30M3
Within 3
30M3
Within 3
WithinM30L
Number of cyclesD5 cycles
RecoveryDAt least 1hr of recovery under the standard
condition after the removal from test chamber,
followed by the measurement within 2hrs.
LHLYLHFYFBD
Accoding to JIS C0025
Conditions for 1 cycle
Step TemperaturefCg
Minimum operating
1
temperature
J0
K3
2 Room temperature
Maximum oparating
3
temperature
J2
K0
4 Room temperature
Durationfming
30M3
Within 3
30M3
Within 3
Number of cyclesD10 cycles
ʤLHL˘˘˘, LHF˘˘BB, LHF15BBʥ
D5 cyclesfFBA, FBRg
RecoveryD4 to 24hrs of recovery under the standard con-
dition after the removal from the test cfamber.
ʤLHL˘˘˘, LHF˘˘BB, LHF15BBʥ
D3hrs of recovery under the standard condition af-
ter the removal from the test cfamber.fFBA, FBRg
LAVD
Conditions for 1 cycle
Step TemperaturefCg
Minimum operating
1
temperature
J0
K3
2 Room temperature
Maximum oparating
3
temperature
J2
K0
4 Room temperature
Durationfming
30M3
Within 3
30M3
Within 3
Number of cyclesD10 cycles
RecoveryDAt least 1hr of recovery under the standard
condition after the removal from test chamber,
followed by the measurement within 2hrs.
FLD
Accoding to JIS C0025
Conditions for 1 cycle
Step
1
2
3
4
TemperaturefCg
K25
J0
K3
Room temperature
J85
J2
K0
Room temperature
Durationfming
30M3
Within 3
30M3
Within 3
Number of cyclesD10 cycles
RecoveryD1 to 2hrs of recovery under the standard con-
dition after the removal from the test cfamber.
349