ZYPADBR2000 Datasheet, PDF (2/3 Pages) List of Unclassifed Manufacturers – Lightweight compact battery operated wearable/vehicle mount computer

Zypad BR2000
Specifications
Small, Durable, and Connected
Wearable/Vehicle-Mounted Computer
System Architecture
PROCESSOR
• Intel® Atom™ E660T @ 1.3 GHz CPU
• Intel PCH EG20T
GRAPHICS/AUDIO
• 1 x 2D/3D VGA display output (LVDS optional)
• 1 x Composite video (NTSC/PAL) output
• Audio microphone and headset output
MEMORY
• 1GB RAM (up to 2GB supported)
• High-capacity Compact Flash (with option for Secure Erase)
• Up to 32GB Onboard Flash
OPERATING SYSTEM
• WES XP
• Embedded Linux
• Android (contact factory on availability)
• Wind River Linux
• WIN 7
USB
• 6x USB 2.0 ports
SERIAL PORTS
• 1 x RS-232/422 (full port)
• 2x RS-232 (Tx/Rx)
INTEGRATED WIRELESS RADIOS
• 802.11 b/g/n with integrated antenna
• Bluetooth (Class 1, EDR up to 2-3Mbps) with integrated antenna
• 50-channel GPS receiver with integrated antenna
ETHERNET
• 1 x 10/100/1000BASE-T Ethernet interface
I/O EXPANSION PORTS
• Expansion device support via USB, PCIe, DIO, RS-232/422 (accessible in connector
interface panel)
SECURITY
• Trusted Platform Module v l .2
• Emergency Erase/Sanitize support
USER CONTROLS
• 1x Power on/off button
• 4x Programmable keypad buttons (Up, Down, Select, Back)
• Configuration control/maintenance display
• LED indicators for alarm, power, and battery level
• Concealed emergency erase button
PHYSICAL
• Weight: 820gr (1.8 lh)
• Dimesions: 168 x 107 x 40 mm
• Metal: Aluminum alloy, corrosion resistant
• Mounting: Screw-down attach points for direct fixed mount or quick release brackets
• Humidity: Up to 95% relative humidity (non-condensing, conformal coating option)
• IEC 60529 IP67-class enclosure (sealed against water, dust)
• Connectors: Miniature military-grade push-pull circular, single-hand blindmate
POWER
• 5W average power consumption (typical wearable use case)
• Up to 6 hours of battery pack run time (25Wh battery pack capacity)
• Internal backup battery for main battery fast swap
• External DC power input range from 9 to 16VDC
• Remote power on/off support
• Auxiliary power output for external peripherals (5VDC)
• Field replaceable battery pack options: Li-Ion rechargeable/disposable CR123
• Operating temperature: -20°C to +50°C (with standard battery)
• Operating temperature: -40°C to +71°C (no battery)
DESIGNED TO MEET
• Crash safety shock: 75g, 11ms, 2 pos/neg per axis, total 12 sawtooth pulses
• Random vibration: SAE J1455-2006, vehicle profile; MIL-STD-810G (Method 514)
• Water immersion: 1 meter submersion, 30 minutes (similar to IP67)
• Dust ingress: designed for compliance w/method 510.4, no dust ingress
• Operational altitude: sea level to ~20,000 ft (~6096 meters)
EMI/EMC CERTIFICATIONS
• IEC 61000-4-2 EMC-Part 4-2
• EN 55022/CISPR22 Immunity and Emissions
• MIL-STD-461F for conducted and radiated emissions/susceptibility
Note: The information in this document is subject to change without notice and should not be construed as a commitment by EUROTECH.
While reasonable precautions have been taken, EUROTECH assumes no responsibility for any error that may appear in this document.
All trademarks or registered trademarks are the properties of their respective companies.
North America
[e-mail]
Europe, Middle East and Africa
[e-mail]
Latin America
[e-mail]
Asia Pacific
[e-mail]
ETH_Zypad BR2000_DS_01/2014
For your local contact please refer to:
www.eurotech.com/contacts