X1G0041310013XX Datasheet, PDF (2/6 Pages) List of Unclassifed Manufacturers – TG-5006CJ-22L 16.367667 MHz

5.Timing chart
Output waveform (Clipped sine wave output)
Vp-p
tW
t
6.Test circuit for TCXO
1) Output Load : 10 kΩ//10 pF
V_CC
N.C
Supply
By-pass
Voltage _Capacitor
0.01 mF
GND
SYM=tw/t×100 %
OUT
GND
0.01
10 pF
2) Current consumption
A
Supply
Voltage
By-pass
Capacitor
0.01 mF
0.01
V_CC
OUT
N.C
GND
10 pF
Test Point
10 kΩ
10 kΩ
3) Conditions
1. Oscilloscope: Impedance
Min. 1 MΩ
Input capacitance Max. 10 pF
Band width
Min. 300 MHz
Impossible to measure both frequency and wave form at the same time.(In case of using
oscilloscope's amplifier output, possible to measure both at the same time.)
2. Load_C includes probe capacitance.
3. A capacitor (By-pass:0.01 to 0.1 uF) is placed between V_CC and GND,and closely to TCXO.
4. Use the current meter whose internal impedance value is small.
5. Power Supply
Impedance of power supply should be as low as possible.
2 Page