UPS30-4003 Datasheet, PDF (2/2 Pages) List of Unclassifed Manufacturers – Open Frame 2.76X5.12 Universal Input AC/DC Converter

Model UPS30-4003
PIN ASSIGNMENTS UPS30-4003
CONNECTOR
CN1
CN2
AC INPUT DC OUTPUT
PIN 1
NEUTRAL +5V
PIN 2
N/C
+5V
PIN 3
LINE
COM
PIN 4
COM
PIN 5
-12V
PIN 6
+12V
MOLEX (or equiv)
09-65-2038 09-65-2068
Mating Connector
09-50-1031 09-50-1061
WIDTH LENGTH HEIGHT
OUTLINE ^{inch 2.76}
mm 70.2
5.12
127.0
1.16
29.5
MOUNTING ^{inch 2.38}
4.72
N/A
mm 60.0 120.0
N/A
SHIPPING SPECIFICATIONS
MODEL
UNITS PER CARTON CARTON WEIGHT
UPS30-4003
64.0
14 Kgs 30.9 Lbs
NOTES:
1. Total peak power must not exceed the value indicated with each output not exceeding its peak current rating. The power supply may be capable of
providing more than the specified continuous and/or peak ratings. Consult a factory Sales Engineer for feasibility.
2. Minimum load specified assures output voltage stability for all specified line voltage conditions. Full compliance to the total regulation specification may
require additional loading (not to exceed 25% of rated output current). Operation at no load will not damage the power supply.
3. Each output can provide its full rated output current, provided total wattage does not exceed nominal (continuous) rating.
4. Peak Power is available for 30 seconds maximum with a 10% duty cycle.
5. Total regulation includes the combined effects of: a) initial set point of main output of ± 1% max; b) line regulation for any input voltage change between
90 & 264 VAC; c) load regulation for a MIN. –100% of rated continuous load change: assumes that the total continuous power rating of the supply is not
exceeded. [See Note3]. Performance during peak loading conditions is not included in the figure.
6. Specifications are subject to change without notice. AUTEC cannot be held liable for errors or omissions or the consequences thereof.
Autec Power Systems
685 E Cochran St, Simi Valley, CA93065
www.autec.com
Tel: [phone]
Fax: [phone]