RWS-F868 Datasheet, PDF (2/7 Pages) List of Unclassifed Manufacturers – Wireless Hi Sensitivity Receiver Module

The RWS-F868 Module receiver is ideal for short-range wireless control and data
applications where robust operation, small size, low power consumption and low
cost are required. The RWS-F868 MODULE All critical RF functions are contained
in the MODULE, simplifying and speeding design-in. The RWS-F868 is sensitive
and stable. A wide dynamic range log detector, in combination with digital RSSI
and a compound data slicer , provide robust performance in the presence of
on-channel interference or noise. FCC 15.249 and similar regulations.
1. OOK BER measured with no DS1 threshold (DS2 disabled), and data encoded
for DC-balance with a run length limited to 4 bit periods.
2. ASK BER measured with a 25 mV DS1 threshold, DS2 threshold 6 dB below
peak, and data encoded for DC-balance with a run length limited to 4 bit periods.
3. Sleep to receive recovery time is for the sleep period and signal level indicated,
-40 to 60 C.Recovery time will increase at higher temperatures, for longer sleep
intervals and lower signal levels.9600BSP to change 100KBPS cut capacitance
a.b.c
Absolute Maximum Rating
Rating
Power Supply and All Input /Output Pins
Non-Operating Case Temperature
Soldering Temperature(10 seconds)
Value
Unit
-0.3 to +4.0
V
-10 to +70
℃
230
℃
Electrical Characteristic, 200 Kbps On-Off Keyed, Low-Current
RX Mode
Characteristic
Sym Note Min Type Max Unit
Operating Frequency fo
Receiver
Performance (OOK
@ 2.4 kbps)
Input Current, 3.6 Vdc
Supply
IR
Input Signal for 10
BER, 25 C
1
868.35
MHz
ASK
0.9
mA
-98
dBm
http://www.wenshing.com.tw ; http://www.rf.net.tw
RWS-F868 Datasheet P.2