RWS-434N-LV Datasheet, PDF (2/5 Pages) List of Unclassifed Manufacturers – Wireless Narrow Band Receiver Module

Function Introduction
This wireless high-frequency receiver module RWS-434N-LV is through
WENSHING R&D team assembled many years of experience to develop this
high sensitivity OOK receive module. Lost cost, high stable also can provide
the best RF solution in the market.
Design ideal is to use SAW filter, highly suitable for industry control or bad
place for use, strong anti-jamming. Built-in automatic gain circuit (AGC), it will
automatically change front-end LNA gain among received signal strength also
makes signal output will not be strong or weak signals which caused by phase
distortion, so that it can rise higher sensitivity. To receive the local oscillation
circuit for the PLL lock loop design, no offset, and stability is high.
Frequency is 433.92MHz and receiver structure is super heterodyne, received
signal is OOK. After received signal, it will output TTL signal to external
decoder IC for decoding.
It is convenience to use in different products and external components is not
necessary to make products be wireless also bring value-added for your
products.
Application
Security System
Wireless Remote Control Car
Wireless Remote Control Robot
Automatic Power Switch Control
Wireless Remote Security System
Model: RWS-434N-2
 433.92MHz Lost cost Receiver Module
 Build-in AGC
 Low Working Voltage 3.0V~5.5V
 Low Current 10mA
 High Sensitive -118dBm
http://www.wenshing.com.tw ; http://www.rf.net.tw
RWS-434N-LV Datasheet P.2