|
PXI-7901 Datasheet, PDF (2/2 Pages) List of Unclassifed Manufacturers – PXI specifications Rev. 2.2 compliant | |||
|
◁ |
PXI-7921
24-CH 2-Wire Multiplexer Module
Switches
â Supported Operating System
⢠Windows 2000/XP
â Driver and SDK
⢠LabVIEW, MATLAB, Visual Studio, Visual Studio.NET
â Software Utility
⢠ADL-SWITCH for Windows
Specifications
Features
â PXI specifications Rev. 2.2 compliant
â 24-CH DPDT (2 Form C) non-latching relays
â Switching capacity
⢠2 A switching, 2 A carrying
⢠220 VDC, 125 VAC
â Onboard 1 k-sample scan list for deterministic scanning
â Hardware emergency shutdown with programmable relay
safety status
Source Wire
1-wire
2-wire
4-wire
Multiplexer
One 48x1
One 24x1, Two 12x1, Four 6x1
One 12x1
Relay Characteristics
â Number of channels: 24 (2-wire)
â Relay type: DPDT (2 Form C), non-latching
â Switching capacity
· Max. switching current: 2 A
· Max. switching voltage: 220 VDC, 125 VAC
· Max. switching power: 60 W
· Max. carrying current: 2 A
â Contact resistance: 100 mΩ max.
PXI-7931
4x8 2-Wire Matrix Module
Safety Functions
â Emergency shutdown
· Logic level: 3.3 V/TTL (5 V tolerant)
· Active with logic low
General Specifications
â I/O Connector: 62-pin D-sub male
â Operating temperature: 0ËC to 55ËC (32ËF to 131ËF)
â Storage temperature: -20ËC to 70ËC (-4ËF to 158ËF)
â Relative humidity: 5% to 85% non-condensing
Certifications
â EMC/EMI: CE, FCC Class A
Ordering Information
â PXI-7921
24-CH 2-Wire Multiplexer Module
* Failure rate indicates the lower limit of switching capacity of a
relay contact at a reliability level of 60%
Terminal Boards & Cables
â TB-6221-01
Multiplexer Switch Terminal Board with One 62-
Pin D-Sub Female Connector for PXI-7921
â ACL-10262
62-pin D-sub male/female cable, 1 M
(For more information about mating cables, please refer to
P3-48.)
Features
â PXI specifications Rev. 2.2 compliant
â Configuration determined by terminal board
â Up to 32 cross-point DPDT (2 Form C) non-latching relays
â Contact rating
⢠2 A switching, 2 A carrying
⢠220 VDC, 125 VAC
â Onboard 1 k-sample scan list for deterministic scanning
â Hardware emergency shutdown with programmable relay
safety status
â 8 auxiliary 3.3 V/TTL digital inputs/outputs with
5 V tolerance
â Supported Operating System
⢠Windows 2000/XP
â Driver and SDK
⢠LabVIEW, MATLAB, Visual Studio, Visual Studio.NET
â Software Utility
⢠ADL-SWITCH for Windows
Specifications
Source Wire
Multiplexer
2-wire One 4x8, Two 4x4, One 2x16, Two 2x8, Four 2x4
Relay Characteristics
â Number of cross points: 32 (2-wire)
â Relay type: DPDT (2 Form C), non-latching
â Switching capacity
· Max. switching current: 2 A
· Max. switching voltage: 220 VDC, 125 VAC
· Max. switching power: 60 W
· Max. carrying current: 2 A
â Contact resistance: 100 mΩ max.
Auxiliary Digital I/O
â Numbers of channel: 8 inputs/outputs
â Compatibility: 3.3 V/TTL (5 V tolerant)
Safety Functions
â Emergency shutdown
· Logic level: 3.3 V/TTL (5 V tolerant)
· Active: logic low
General Specifications
â I/O Connector: 62-pin D-sub male
â Operating temperature: 0ËC to 55ËC (32ËF to 131ËF)
â Storage temperature: -20ËC to 70ËC (-4ËF to 158ËF)
â Relative humidity: 5% to 85% non-condensing
â Power requirements: (when all relays are ON)
â Dimensions
160 mm x 100 mm (not including connectors)
Certifications
â EMC/EMI: CE, FCC Class A
Ordering Information
â PXI-7931
4x8 2-Wire Matrix Module
* Failure rate indicates the lower limit of switching capacity of a
relay contact at a reliability level of 60%
Terminal Boards & Cables
â TB-6231-01
Multiplexer Switch Terminal Board with One
62-Pin D-Sub Female Connector for PXI-7931
â ACL-10262
62-pin D-sub male/female cable, 1 M
(For more information about mating cables, please refer to
P3-48.)
Updated September 23, 2014. ©2014 ADLINK Technology, Inc. All Rights Reserved. All specifications are subject to change without further notice.
www.adlinktech.com 2-24
|