PCBSMAFST2HBHT Datasheet, PDF (2/3 Pages) List of Unclassifed Manufacturers – SMA (F) Jack 2 Hole Panel Mount with Solder Post Termination

1. Introduction
The PCB.SMAFST.2H.A.HT connector was designed to be mounted on a PCB, it has a Solder Post
for connection and 2 Mounting holes. The connector pin is directly soldered onto pads on the PCB.
The connector is a standard SMA (F) Jack. The SMA connector is the most popular type
connector for RF applications. Taoglas connectors are all RoHS compliant.
2. Specification
Impedance
Frequency Range
Working Voltage
Dielectric withstanding Voltage
Insulation Resistance
Connector Dimension
Connector Pin Diameter
Connector Pin Height
Connector Type
ELECTRICAL
50Ω
0~12.4 GHz
Max. 335 Vrms
≤1000 Vrms
≥5000M Ω
MECHANICAL
11.52 X 15.88 mm
1.27 mm
2 mm
SMA (F)
ENVIRONMENTAL
RoHS compliant
SPE-12-8-141/A/WY
Page 2 of 3