OBR5T-50 Datasheet, PDF (2/2 Pages) List of Unclassifed Manufacturers – Fault location- Measure RL, IL, length

OBR 5T-50
PARAMETER
SPECIFICATION
SINGLE SCAN 10 AVERAGES
Length Characteristics:
Maximum Device Length
Spatial Resolution (two-point)¹
Length Accuracy²
8.5
20
± 0.015% of Length
Dead Zone:
Dead Zone
20
Wavelength:
Wavelength Range
40
Wavelength Accuracy²
1.5
Center Wavelength
1546.69
Integrated Return Loss Characteristics:
Dynamic Range³
60
65
Total Range⁴
-14 to -120
-14 to -125
Sensitivity⁴
-120
-125
Resolution⁵
± 1.0
± 1.0
Accuracy⁵
± 1.0
Insertion Loss Characteristics:
Dynamic Range⁶
Resolution⁷
Accuracy⁷
10
± 0.5
± 0.5
15
± 0.5
Measurement Timing:
11.9
Maximum Optical Power:
8
Physical:
Optical Connector Type
FC/APC
Dimensions
14 x 12.5 x 6.75 (36 x 32 x 17)
Weight
17.3 (7.85)
Maximum Power Consumption
50
UNITS
meters
µm
--
µm
nm
pm
nm
dB
dB
dB
dB
dB
dB
dB
dB
Hz
mW
In (cm)
lb (kg)
W
1 Distance between two sample points along the length axis in SMF-28.
2 Accuracy is guaranteed via NIST-traceable HCN gas cell.
3 Range between strongest reflection greater than -30 dB and noise floor.
4 Noise floor return loss at half maximum length.
CLASS 1 LASER PRODUCT
5 Measured with 1 cm integration width.
6 Two way loss before backscatter reaches noise floor, and IL
measurements are no longer possible.
7 Measured with 10 cm integration width.
©Luna Innovations Incorporated, Roanoke, VA
All rights reserved.
OBR is a trademark of Luna Innovations Incorporated.
LTOBR5T-50 LONG REV. 004 08/20/2013