|
HD1P040MA1R6000 Datasheet, PDF (2/8 Pages) List of Unclassifed Manufacturers – Board-to-Cable Connector for High-speed Transmission HD Series Connector | |||
|
◁ |
MB-0247-1
General Specifications
ï®Number of Contacts:
40 (HD1), 30 (HD2)
ï®Applicable Cable:
AWG#32 to 36 (Discrete cable)
AWG#36 to 44 (Micro-coaxial cable)
ï®Rated Current:
1.0A per contact AC/DC [AWG#32]
1.0A per contact AC/DC [AWG#34]
0.8A per contact AC/DC [AWG#36]
0.3A per contact AC/DC [AWG#40]
0.24A per contact AC/DC [AWG#42]
0.1A per contact AC/DC [AWG#44]
ï®Pitch: 0.5mm
ï®Dielectric Withstanding Voltage:
AC250V r.m.s. per minute
ï®Contact Resistance*:
AWG#32: 140m ï max.
AWG#34: 180m ï max.
AWG#36: 275m ï max.
AWG#40: 600m ï max.
AWG#42: 700m ï max.
AWG#44: 1080m ï max.
ï®Insulation Resistance: 1000M ï min.
ï®Rated Voltage:
AC, DC each 100V per contact
ï®Operating temperature:
-40 Deg. C to 85 Deg. C
*Values include the following conductor resistance of
100mm cable.
AWG#32: 60m ï max.
AWG#34: 100m ï max.
AWG#36: 160 to 195m ï max.
AWG#40: 485 to 520m ï max.
AWG#42: 585 to 620m ï max.
AWG#44: 1000m ï max.
Materials / Finishes
Board Side Receptacle Connector HD1S040HA1, HD2S030HA1
Component
Contact
Insulator
Shell
Material / Finish
Copper alloy / Au plating over Ni (contact area)
Heat resistance plastic / No finish
Copper alloy / Au plating over Ni
Plug Connector HD1P040MA1
Component
Contact
Insulator
Base shell
Material / Finish
Copper alloy / Au plating over Ni
Heat resistance plastic / No finish
Copper alloy / Au plating over Ni
Cover Shell for Plug HD1P040-CSH2-10000
Component
Cover shell
Material / Finish
Copper alloy / Au plating over Ni
JAE PMK Div. Proprietary. Copyright © 2012ï¼Japan Aviation Electronics Industry, Ltd.
2/8
|
▷ |