HC103M2 Datasheet, PDF (2/2 Pages) List of Unclassifed Manufacturers – Fast High End Humidity Sensors for Radiosondes / Registering Balloons

Dimensions (mm)
1 mm = 0.03937” / 1” = 25.4 mm
Mounting Instructions
contact area
To allow full access of the air, the humidity sensor should
be positioned over an opening in the printed circuit board
(PCB).
False readings because of humidity assimilation at the
front side of the PCB should be avoided as much as
possible by using gold-plated-through holes.
Assembling and Soldering
HC103M2 sensor series are designed for SMD automatic assembling with subsequent reflow-
soldering. For more details please refer to mounting instructions.
Recommended SMD equipment:
· Automatic tooling machine with suction pipette
· Optical control for sensor identification
Ordering Guide
TYPE
HC103M2
HC
PACKAGING
(103M2)
tray (240 sensors)
500 sensors per reel
1000 sensors per reel
2500 sensors per reel
10000 sensors per reel
(no code)
(TR0,5)
(TR1)
(TR2,5)
(TR10)
Order Example
HC103M2TR1
Type:
HC103M2
Packaging: 1000 sensors per
reel
HC103M2