GW17070250E Datasheet, PDF (2/20 Pages) List of Unclassifed Manufacturers – 2.4GHz 2dBi Click-in Terminal Dipole Antenna 250mm RG-178 cable IPEX MHFI

I. Introduction
The GW.17 Click –in Terminal Antenna is a high performance robust 2.4GHz dipole
antenna designed for quick assembly onto finished products. The specially designed
click in plastic head greatly reduces the assembly time and cost compared with most
terminal antennas with connector. The standard product comes with 250mm low loss
RG-178 cable and IPEX MHFI (U.FL) connector. Having the cable and IPEX connector
coming out directly from the housing eliminates the need for a separate costly cable
assembly and bulky mating connector on the device.
The GW.17 has excellent stable radiation properties in all mounting conditions, mounted
with and without a ground-plane, in bent 90 degrees or straight position.
Cable length and connector type
II. Specification
Frequency
Peak Gain (straight)
Peak Gain (bend)
Average Gain (straight)
Average Gain (bend)
Efficiency (straight)
Efficiency (bend)
Polarization
Impedance
Radiation Pattern
Input Power
Antenna Length
Antenna Diameter
Antenna Body Material
Temperature Range
Humidity
ELECTRICAL
2.4 ~ 2.5GHz,
2.7dBi
1.6dBi
-1.3dBi
-1.3dBi
74%
74%
Linear
50 Ohms
Omni
2W max.
MECHANICAL
112.6mm
9.3mm
ENVIRONMENTAL
TPU
-40°C to 85°C
Non-condensing 65°C 95% RH
SPE-12-8-014/B/ZL
Page 2 of 20