GC283 Datasheet, PDF (2/10 Pages) List of Unclassifed Manufacturers – AUDIO

5 & 6 Contact
Materials &
Finish
Shells
Panel Nuts
Contacts
Insulators
Stainless steel, passivated, sand-blasted.
Stainless steel, passivated, sand-blasted.
Copper alloy, .000030 gold per MIL-G-45204, Type I, Class 0 over
.001 nickel.
Diallyl phthalate per MIL-M-14F, Type MDG.
Specifications
Electrical
Mechanical
Dielectric Strength—500 V RMS.
Insulation Resistance—1000 Megohms, Min.
Contact Resistance (mated)—0.050 Ohms, Max.
Air Pressure—2.5 psi.
Immersion—48 hrs. at 6 ft.
Durability—3000 cycles, mate and unmate.
10 Contact
Materials &
Finish
Receptacle Shells
Plug Shells
Plug Rear Housing
Panel Nuts
Contacts
Insulators
Stainless steel, passivated, sand-blasted.
Stainless steel, black passivated.
Aluminum, black oxide.
Stainless steel, passivated, sand-blasted.
Copper alloy, .000030 gold.
Diallyl phthalate per MIL-M-14F, Type MDG.
Specifications
Electrical
Mechanical
Dielectric Strength—500 V RMS.
Insulation Resistance—1000 Megohms, Min.
Contact Resistance (mated)—0.015 Ohms, Max.
Air Pressure—2.5 psi.
Immersion—48 hrs. at 6 ft.
Durability—3000 cycles, mate and unmate.
7