FXUB66010150C Datasheet, PDF (2/15 Pages) List of Unclassifed Manufacturers – Maximus Flexible Ultra Wide-Band Antenna 700-6000MHz

1. Introduction
The patent pending Maximus FXUB66
flexible ultra wide band antenna has been
designed to cover all working frequencies
in the 700-6000 MHz spectrum, including
all Cellular, Wi-Fi, ISM and GNSS bands.
Its use in a device improves substantially
the radiated power and sensitivity,
and enables the highest throughput
rates of today’s broadband devices.
The antenna is delivered with a flexible
body with ground breaking high efficiencies
on all bands, ground-plane independent,
with a cable and connector for
easy installation. It is made of durable
flexible polymer, with a peak gain of 5dBi,
an efficiency of more than 60% across
all cellular bands and is designed to be
mounted directly onto a plastic or glass
enclosure / cover.
At 120.4x50.4x.2mm, the antenna is ultra
thin. It is assembled by a simple “peel and
stick” process, attaching securely to
non-metal surfaces via 3M adhesive.
It enables designers to use only one
antenna that covers all frequencies and
future proofs device design for LTE and
4G globally. It is also the ideal antenna to
fit in devices that are being retrofitted with
wireless functionality, as it will cover non
cellular applications such as 868, 915MHz
or Zigbee applications. It’s inherently wide
bandwidth is more resistant to detuning
than traditional small but narrow-band
legacy antennas.
The Maximus antenna has a unique
hybrid design. Within one antenna structure
the electromagnetic waves travel in two
predominant propagation modes - one for
lower frequencies, (e.g. LTE at 700 MHz)
and the other for higher 4G and Wi-Fi
frequencies up to 6GHz.
It is an ideal choice for any device maker
that needs to keep manufacturing costs
down over the lifetime of a product,
as the same antenna can be used if the
radio module is upgraded to work on
a different frequency band.
Cables and connectors are customizable.
SPE-12-8-145/A/RC | page 2 of 15