D2E146-AP47-22 Datasheet, PDF (2/5 Pages) List of Unclassifed Manufacturers – AC centrifugal fan

D2E146-AP47-22
AC centrifugal fan
forward curved, dual inlet
with housing (flange)
Technical features
Mass
Size
Surface of rotor
Material of impeller
Housing material
Motor suspension
Direction of rotation
Type of protection
Insulation class
Humidity class
Max. permissible ambient motor
temp. (transp./ storage)
Min. permissible ambient motor
temp. (transp./storage)
Mounting position
Condensate discharge holes
Operation mode
Motor bearing
Touch current acc. IEC 60990
(measuring network Fig. 4, TN
system)
Motor protection
Cable exit
Protection class
Product conforming to standard
Approval
4.4 kg
146 mm
Uncoated
Sheet steel, galvanised
Sheet steel, galvanised
Motor mounted via brackets on one side
Counter-clockwise, seen on rotor
IP 44; Depending on installation and position
"B"
F0
+ 80 °C
- 40 °C
Any
None
S1
Ball bearing
< 0.75 mA
Thermal overload protector (TOP) wired internally
Axial
I (if protective earth is connected by customer)
CE
GOST; CCC
Item no. 10541-5-9980 · Revision 80019 · Release 2014-02-20 · Page 2 / 5
ebm-papst Mulfingen GmbH & Co. KG · Bachmühle 2 · D-74673 Mulfingen · Phone [phone] · Fax [phone] · [e-mail] · www.ebmpapst.com