C6053ALXXXB Datasheet, PDF (2/2 Pages) List of Unclassifed Manufacturers – 6050 DP Splash Resistant Switches - Twins

C6050AL ---
C6053AL ---
C6053PL ---
Integral Splash Resistance
Current carrying parts are protected from moisture.
Droplets which may enter the switch are channelled out through
ports in the switch body
For IP65 see options below
C6000A/C6000AL
C6003P/C6003PL
C6003P/C6030AL
BODY
OPTIONS
L Double pole
Finish Matt is standard.
Panel cut-out *
Bezel
Colour Call sales for custom colours.
A full range is available for large orders.
22.1/22.2
R2.0 ^25.0
Legend printing Select from the examples or
call factory for custom legends.
30.0/
30.1
31.5
Lamp voltage Call sales for details.
Protective cover
The 6050 series is a water through design.
For a higher level of sealing, a snap on cover is
available (add G after body code). This reduces
panel thickness by 1.0mm.
DIMENSIONS (mm)
2.0
30.0
8.0
Panel thickness
L
0.75 to 3.0mm
10.0
* For cut-out details on
momentary switches
call sales
Terminal spacing - Poles 10.5 between centres
L Twin units
Contact sales for information on
splash resistance and IP ratings
Panel cut-out *
22.1/22.2
Bezel
R2.0 ^25.0
Panel sealing washer W42 is available. This
reduces panel thickness by 0.9mm.
Covers are not suitable for momentary types.
IP Ratings Call the sales for details.
30.0/
30.1
31.5 _{Terminal Link P1067 connects the poles of a}
double pole switch or twin unit.
# Mounting orientation may affect IP rating.
BioCote Antimicrobial Additive
Moulded components have antimicrobial
properties using BioCote silver ion technology.
Examples of printing
For all options call sales.
Cut-outs must be punched in the direction of insertion
EN1196
EN1197
21
tel: [phone] • Arcolectric • email: [e-mail]