BCPRO600 Datasheet, PDF (2/6 Pages) List of Unclassifed Manufacturers – BC Pro 600VA Tower Standby 120V UPS with USB port

Front panel LEDs indicate line / battery mode and battery replace status; Audible alarm with alarm cancel / self-test button
Hot swappable user battery replacement
Optional PDUB15 bypass PDU enables hot-swappable UPS replacement with no disruption to connected equipment
Small tower housing supports desk or floor placement
Specifications
OUTPUT
Output Volt Amp Capacity (VA)
600
Output Watt Capacity (watts)
345
Nominal Output Voltage(s)
Supported
115V; 120V
Frequency compatibility
60 Hz
Output voltage regulation (Battery
mode)
115V (+/- 5%)
Built-in UPS output receptacles
6 5-15R outlet(s)
Surge suppression only outlets
3 UPS outlets, 3 surge-only outlets
Hot-Swap PDU options
PDUB15 (2U / 8 5-15R outlets)
Output AC waveform (AC mode)
Sine wave
Output AC waveform (battery mode) PWM sine wave
INPUT
Rated input current (at maximum
load)
Nominal Input Voltage(s) Supported
UPS input connection type
UPS Input cord length (ft.)
UPS Input cord length (m)
Recommended Electrical Service
Phase
12A
120V AC
5-15P
6
1.8
15A 120V
Single-Phase
BATTERY
Full load runtime (minutes)
Half load runtime (minutes)
DC system voltage (VDC)
Battery recharge rate (included
batteries)
Replacement battery cartridge
(internal UPS battery replacement)
5.7 min. (345w)
14.5 min. (175w)
12
Less than 4.5 hours from 10% to 90%
RBC51
2/5