B072-016-1-IP Datasheet, PDF (2/4 Pages) List of Unclassifed Manufacturers – 16-Port, 1+1 User NetCommander Cat5 IP KVM Switch

Features
16-Port, 1+1 User NetCommander Cat5 IP KVM Switch
Directly connect up to 16 computers/servers
Connected computers/servers can be located up to 100 ft. (30 m.) away from the KVM using inexpensive
Cat5e/6 cabling and B078-101-USB2, B078-101-USB-1, or B078-101-PS2 SIUs
Supports HD video resolutions up to 1920 x 1080, including widescreen formats such as 1680 x 1050 and
1600 x 1200
B072-016-1-IP 16-Port, 1+1 User
NetCommander Cat5 IP KVM
Switch
Rackmount Hardware
Power Cord
Owner's Manual CD
Quick Start Guide
Simultaneous support for 2 users (1 local, 1 remote)
Java-based application allows for control of a target server via web browser from any location over a secure IP connection
Multi-Level account access – Administrator and User accounts can be created, with a password being required to access the KVM switch and your
assigned permissions. Administrator accounts have full access, while User accounts can be set up to access only the ports and features necessary to that
individual.
Accessing the connected computers is a breeze; a wide range of video and mouse sync settings ensure optimal remote session performance in any
situation
Remote authentication support - RADIUS and LDAP/S
Supports both IPv4 and IPv6
PDU Control - Add IP PDU's as devices that can be controlled by the KVM. Assign individual ports on the KVM to a PDU port to Power Cycle or Power
Off/On the computer/server connected to that port.
Virtual Media allows an .iso file located in a Shared folder of a SAMBA or NFS server to be mounted to a Target Server and accessed as if it were directly
stored on it. Virtual Media data transfer rates up to 12Mbps (B078-101-USB2 required) are supported. A B078-101-USB-1 can be used to provide Virtual
Media support, but only at speeds up to 1Mbps.
Dual Serial Ports - Connect serial manageable devices such as PDU's, firewalls, and routers.
Dual Ethernet provides redundancy in the event of a crash
Supports the highest security standards for encryption ( 128-bit SSL and HTTPS )
BIOS level control to any server’s brand and model, regardless of the server condition and network connectivity. Covers the entire spectrum of crash
scenarios.
Allows for system sent messages to SNMP server to notify of LAN failures.
Event log records events that take place on the installation, such as logins, reboots, network settings changes, etc..
Allows for the installation of a SSL certificate to ensure secure transactions between the Web servers and browsers.
Access and control the KVM via the graphical remote interface, or a text based local OSD.
Flash upgradeable firmware over the network.
Constructed of heavy-duty steel housing
Specifications
OVERVIEW
# Of Users
Port Control
PC/Server
Cat5 KVM Switch
IP Remote Access
2
Hotkeys, OSD, Remote Toolbar
VGA; USB; PS/2
Yes
YES, BUILT IN
2/3