ATMF102 Datasheet, PDF (2/3 Pages) List of Unclassifed Manufacturers – Mode-Hop-Free Laser Module

Analog Technologies, Inc.
Key Switch
Power
Supply
Cable
Plug
Laser Body
ATMF102
Collimation Lens
Housing
Circular Laser Beam
Beam
Shape
Beam Circularizer
Remote Control
Switch Cable Plug
Specifications
Figure 3 Generating a Circular Laser Beam
Parameters Name
Wavelength selection range*:
Absolute wavelength accuracy:
Output power:
Output power stability:
Output noise (10Hz to 2MHz):
Spectrum line-width:
Coherent length
Beam divergence:
Elliptic Beam size:
Circular Beam size:
Polarization:
DC power supply voltage required:
DC power supply current drawn:
AC input voltage:
AC input power:
Environmental operating
temperature:
Environmental relative humidity:
Case operating temperature:
Overall dimensions:
Values
638nm to 665nm and 405nm
<±0.1nm
1mW to 50mW
0.1% within 24 hours
0.01% RMS
<20MHz
>10m
<1mrad
2mm × 4mm
φ4mm
> 100:1
5V ± 5%
0.1A to 1A
80V – 240V, 47Hz to 63Hz
7W max
0°C to 40°C
<80%
0°C to 65°C
See the drawings in Figure 4 to 6
Note
Both elliptic and circular beams
Collimated elliptic beam
Collimated circular beam
*Wavelength depends on the laser diode used. The laser diode, the output wavelength and output power can be
specified when ordering.
Contact us for more information: [e-mail]
550 E. Weddell Drive, Suite 4, Sunnyvale, CA 94089, U. S. A. Tel.: [phone], Fax: [phone], www.analogtechnologies.com
© Copyright 1999 – 2003, Analog Technologies, Inc. All Rights Reserved. Updated: 11/3/04
2