APS18P6A016G-CCM Datasheet, PDF (2/21 Pages) List of Unclassifed Manufacturers – Serial ATA Flash Drive

Serial ATA Flash Drive
APS18P6Axxxx-CCMXX
Features:
z Standard Serial ATA 2.6
– Serial ATA 2.6
– SATA II, 3.0 Gbps
– ATA-compatible command set
z Capacities
– 16, 32, 64, 128, 256 GB
z Performance*
– Burst read/write: 300 MB/sec
– Sustained read: up to 250 MB/sec
– Sustained write: up to 165 MB/sec
z Intelligent endurance design
– Built-in hardware ECC, enabling up to
16/24 bit correction per 1024 bytes
– Static wear-leveling scheme together
with dynamical block allocation to
significantly increase the lifetime of a
flash device and optimize the disk
performance
– Flash bad-block management
– S.M.A.R.T.
– Power Failure Management
– ATA Secure Erase
z NAND Flash Type: MLC
z Zero power data retention
– No battery required for data storage
z Temperature ranges
– Operation:
Standard: 0°C to 70°C (32 ~ 158°F)
Extended: -40 ~ +85°C (-40° ~ 185°F)**
– Storage: -40°C to 100°C (-40° ~ 212°F)
z Supply voltage
– 3.3V & 5V
z Cache on board: 64 MB
z Power consumption (Typical)*
– Active mode(Max): 819 mA
– Idle mode: 194 mA
z Form factor
– 1.8 inch SATA Flash Drive (78.5 x 54 x 5, unit:
mm)
z Connector
– 7-pin SATA male connector
– 9-pin SATA power connector
z Shock & Vibration
– Shock: 50g (approx.)
– Vibration: 15g (approx.)
z RoHS compliant
*Varies from capacities. The values addressed in the Performance and Power consumption are typical and may vary depending on
settings and platforms.
**Only available in 32, 64, 128GB capacities. Please see “Product Ordering Information” for further details.
1
© 2011 Apacer Technology Inc.
Rev. 1.3