AP-SDM001G1PANS-E Datasheet, PDF (2/18 Pages) List of Unclassifed Manufacturers – Halogen Free SATA-Disk ModuleⅡ

SATA-Disk ModuleⅡ
AP-SDMxxxx1PAXS-E
Features:
 Standard Serial ATA 2.5 (Gen. 2)
– Serial ATA 2.5 (Gen. 2)
– SATAⅡ, 3.0 Gbps
– ATA-compatible command set
 Capacities
– Standard: 1, 2, 4, 8, 16, and 32 GB
– High Speed: 4, 8, and 16 GB
 Performance
– Burst read/write: 300 MB/sec
– Sustained read: up to 100 MB/sec
– Sustained write: up to 100 MB/sec
 Intelligent endurance design
– Built-in hardware BCH ECC, correcting
8-bit or 15-bit error per 512-byte data
sector
– Global wear-leveling scheme together
with dynamical block allocation to
significantly increase the lifetime of a
flash device and optimize the disk
performance
– Flash bad-block management
– Power Failure management
– Quick Erase
– S.M.A.R.T. technology
 NAND Flash Type: SLC
 Data integrity under power-cycling
– No battery required for data storage
 Temperature
– 0°C to 70°C for operating
– -40°C to 100°C for storage
 Supply voltage
– 5.0 V ± 5%
 Low power consumption
– Active mode: 260 mA
– Idle mode: 130 mA
 Connector
– 7-pin SATA signal connector
– 15-pin SATA power connector
 RoHS compliant
1
© 2010 Apacer Technology Inc.
Rev. 1.1