9CRL0612P0G001 Datasheet, PDF (2/2 Pages) List of Unclassifed Manufacturers – Long Life Counter Rotating Fan San Ace 60L

˙ PWM
Input Signal Example
Input Signal Waveform
VIH
VIL
T1
T
VIH=4.75V to 5.25V
VIL=0V to 0.4V
PWM
PWM
Duty Cycleʢ%ʣ=
T1
T
Frequency 25ʢkHzʣ=
Ê·100
1
T
Source Current : 5mA Max. at control voltage 0V
Sink Current : 5mA Max. at control voltage 5.25V
Control Terminal Voltage : 5.25V Max. (Open Circuit)
When the control lead wire is open,
the fan speed is the same as the one at a PWM duty cycle of 100%.
Either TTL input, open collector or open drain can be used for
PWM control input signal.
˙ Example of Connection Schematic
˓ ʴ
DC fan input voltage
Inside of DC fan
PWM Input Signal
Isource
Isink
Control
˓ ʵ
˙ Specifications for Pulse Sensors
Output circuit : Open collector
Inside of DC fan
VCEʹʴ13.8V MAX.
Icʹ5mA MAX.ʦVCEʢSATʣʹ0.6V MAX.ʧ
Sensor
Pull-up resistor
Ic
Sensor output
Ê¢VCEÊ£
Pull-up voltage
Output Waveform ʢNeed pull-up resistorʣ
In case of steady running
ʢOne revolutionʣ
T0
VOH
T1 T2 T3 T4
VOL
0V
T1ʙ4˺ʢ1/4ʣT0
T1ʙ4˺ʢ1/4ʣT0ʹ60/4Nʢsecʣ
NʹFan speedʢmin^-1ʣ
˙ Dimensions (unit : mm)
Outlet Side
60ʶ0.5
50ʶ0.3
+50
300 0
(10)
4-П4.3ʶ0.3
Mounting Hole
(10)
+50
300 0
4ʶ0.3
4ʶ0.3
76ʶ0.5
Rotating Direction
Lead Wire
AWG26
UL1430
Air Flow Direction
Inlet Side
˙ Reference Dimension of
Mounting Holes and
Vent Opening (unit : mm)
Inlet Side , Outlet Side
59
50±0.3
29.7
4-П4.5
4-П4.3ʶ0.3
62.7
Mounting Hole
Rotating Direction
Notice
˔The products shown in the catalog are subject to Japanese Export Control Law. Diversion contrary to the law of exporting country is prohibited.
˔To protect against electrolytic corrosion that may occur in locations with strong electromagnetic noise, we provide fans that are unaffected by electrolytic corrosion.
3-33-1, Minami-Otsuka, Toshima-ku, Tokyo, 170-8451, Japan TEL: [phone]
http://www.sanyodenki.com
The names of companies and/or their products specified in this catalog are the trade names, and/or trademarks and/or registered trademarks of such respective companies.
“San Ace” is a trademark of SANYO DENKI CO.,LTD.
Specifications are subject to change without notice.
CATALOG No. C1027B001 ‘13.9