98025 Datasheet, PDF (2/2 Pages) List of Unclassifed Manufacturers – LED Light Engine, 7” Canopy Module

7” Canopy Std. DC
LED Light Engine Module
SSL Solutions Faster Than The Speed Of Light^®
Pg 2 of 2
CIE Chromaticity Coordinates:
4000K
ANSI
X
0.3736
0.3996
0.3670
0.3898
Y
0.3874
0.4015
0.33578
0.3716
5000K
ANSI
X
0.3376
0.3548
0.3366
0.3515
Y
0.3616
0.3736
0.3369
0.3487
Relative Luminous Flux / Tc Temperature
1.20
1.10
1.00
0.90
0.80
0.70
-50 -30 -10
10
30
50
Tc (°C)
70
90 110
700mA/LED
Step Dimming:
This Light Engine can be step-dimmed See the SD2 or SD3 data sheet.
Series/Parallel Configurations
Compatible TRP Drivers:
The drivers listed here are all compatible with this module.
Choose the best driver for your application.
• LED12W-48-C0250
• LED20W-57-C0350
• LED20W-57-C0350-D
• LED20W-43-C0460
• LED20W-43-C0460-D
• LED20W-40-C0500
• LED20W-40-C0500-D
• LED20W-040-C0350-LE
• LED20W-040-C0350-TE
• LDC25W-048-C0450
• LED25W-072-C0350
• LED25W-072-C0350-D
• LED25W-062-C0400
• LED25W-062-C0400-D
• LED25W-056-C0450
• LED25W-056-C0450-D
• LED25W-040-C0450
• LED25W-040-C0450-D
• LED25W-040-C0620
• LED25W-040-C0620-D
• LED25W-48-C052-LE
• LED25W-48-C052-TE
• LEDDC25W-072-C0350
• LEDDC25W-072-C0350-D
• LED30W-85-C0350
• LED30W-42-C0700
• LED30W-85-C0350-D
• LED30W-075-C0450
• LED30W-075-C0450-D
• LED30W-075-C0400
• LED30W-075-C0400-D
• LED30W-42-C0700-D
• LED35W-054-C0700
• LED35W-054-C0700-D
• LED40W-114-C0350
• LED40W-114-C0350-D
• LED40W-100-C0450
• LED40W-100-C0450-D
• LED40W-089-C0450
• LED40W-089-C0450-D
• LED40W-054-C0700
• LED40W-054-C0700-D
• LED40W120-054-C0700-LT
• LED40W230-054-C0700-LT
• LED50W-72-C0700
• LED50W-72-C0700-D
• LED60W-086-C0700
• LED60W-086-C0700-D
• LEDDC60W-086-C0700
Parallel: T he positive and negative of one board is connected to the respective positive and negative of the next.
Current adds, so the supply must be 2x the current for 2 boards.
Series: The negative of one board is connected to the positive of the next. Voltage adds, so the supply must be 2x the voltage for 2 boards.
Parallel
Constant
Current
Driver
Series
Constant
Current
Driver
Maximum Run Lengths
The max number of boards wired in a chain (series) is limited by the
max current rating of the first board wired to the driver. The sum of the
board currents, in the chain, funnels through the first board. Multiple
chains can connect directly to the power supply in parallel. See table
for max chain length.
Product
7” Canopy
Series/Parallel
Series
Max Allowable Boards
High Current (Nom) Low Current
11
22
Mounting Notes
The LED assembly is supplied with mounting holes, per the dimensional
drawing. It is important to mount the board in such a way as to maintain
the Tc point below the max. The steady state thermals in application
will dictate if the board needs to be mounted directly to metallic housing
and/or include a thermal pad. For example fully enclosed recessed
fixture will require better thermal mounting than an open air pendant.
Static Sensitive Device
Handle only at static-safe work stations.
Thermal Application Notes
Heat sink required
during operation.
800
For assistance in
700
designing proper
600
thermal management
500
for your application,
400
contact TRP.
300
200
100
0
5
Maximum Current
Required Heatsink Surface Area
to maintain 90°C junction temp
40°C Ambient
25°C Ambient
10
50
20
25
Convection Coeficient (h)
Max Current: 1500mA
Voltage at max current: 42V, Power at max current: 62W
The total maximum current reflects the LED maximum forward current
only, without considering thermal needs. Driving the LEDs this hard will
likely violate their thermal limits, depending on the application. Tc point
must remain at or below the max temperature, or the warranty will
be voided. Temperature is directly correlated to LED current.
Packaging
50 per box standard.
Thomas Research Products • 1215 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com