|
91NJR10E Datasheet, PDF (2/2 Pages) List of Unclassifed Manufacturers – Lead Free Vitreous Enamel Molded Axial Term. Wirewound, 5% Tolerance Standard | |||
|
◁ |
Features
⢠Prevents severe vibration or mechanical shock
to resistor
⢠Increases resistor wattage up to 100% when
mounted on metal surface (1.5 sq. in. by 0.040
in. thick min. per watt dissipated)
⢠Holes in clip base permit fastening to chassis
surface with machine screws, eyelets or rivets
⢠Sold in bags of ten (10)
Mounting Clip
For 90 Series
Standard part numbers for 90 series mounting clip
Part No.
î´ 5900
î´ 5902
î¹ 5904
î¹ 5906
î¹ 5908
Resistor
rating
(watts)
1.5
2.25
3.25
5.0
11.0
Clip
length
(in./mm)
0.40 / 10.319
0.35 / 8.890
0.50 / 12.700
0.90 / 22.860
1.75 / 44.450
Clip
width
(in./mm)
0.150 / 3.810
0.217 / 5.500
0.257 / 6.500
0.237 / 6.019
0.333 / 8.458
Clip
height
(in./mm)
0.250 / 6.350
0.275 / 6.980
0.319 / 8.103
0.284 / 7.214
0.377 / 9.576
No. of
holes
1
2
2
2
2
Hole
centers
(in./mm)
0.156 / 3.969
0.250 / 6.350
0.400 / 10.160
0.800 / 20.320
Hole
diameter
(in./mm)
0.71 / 1.803
0.71 / 1.803
0.093 / 2.362
0.103 / 2.616
0.103 / 2.616
î¹ = Most popular standard values
î´ = Standard values
î¼ = Non-standard values subject to
minimum handling charge per
item
Ohmite Mfg. Co. 1600 Golf Rd., Rolling Meadows, IL 60008 ⢠1-866-9-OHMITE ⢠Intâl 1-847-258-0300 ⢠Fax 1-847-574-7522 ⢠www.ohmite.com ⢠info@ohmite.com 25
|