9182NH Datasheet, PDF (2/2 Pages) List of Unclassifed Manufacturers – Twinaxial instrumentation and computer cable for data transmission applications

TECHNICAL DATA SHEET
9182NH
code 9182NH
version 5
date 2007-02-15
page 2/2
Nominal attenuation @ 20 MHz
Nominal attenuation @ 50 MHz
Nominal attenuation @ 100 MHz
Nominal attenuation @ 200 MHz
Nominal attenuation @ 400 MHz
Testvoltage conductor-conductor
Testvoltage conductor-screen
Voltage rating
5.58 dB/100m
8.86 dB/100m
14.11 dB/100m
20.34 dB/100m
28.87 dB/100m
2500 VDC, 3 seconds
2500 VDC, 3 seconds
300 V RMS
Mechanical and physical:
Flame resistance
Oil resistance
Radiation resistance
Application specification
Halogen content according to IEC754-1
Corrosivity of fire gasses according to IEC754-2
Conductivity
pH value
Temperature range installing
Temperature range operating (moving installation)
Temperature range operating (fixed installation)
Temperature range storage
Minimum bending radius
IEC 60332-3C
ASTMD741
IEC544 (CERN)
BS 7655 section 6.1 table 1, LTS 3
zero
≤ 100 µS/cm
≥ 3.5
-15 to +80 ˚C
-15 to +80 ˚C
-45 to +80 ˚C
-45 to +80 ˚C
10 x cable diameter
PACKAGING
On non-returnable reels (E 500) with a nominal length of 305m (-0, +10%) or on non-
returnable reels (E 560) with a nominal length of 500m (-0, +10%) or on non-returnable reels
(E 600) with a nominal length of 1000m (-0, +10%).
Each reel is labelled with the following data:
Belden Logo. Belden code number. Item description. Length on the reel. Date of manufacture.
CE-marking.
Belden CDT believes this product to be in compliance with the environmental regulations EU RoHS (Directive 2002/95/EC,
27 January 2003); this is valid for all material produced after the RoHS compliant date for this product.
 Belden Wire & Cable B.V.
All rights are reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner