5962-8866 Datasheet, PDF (2/22 Pages) List of Unclassifed Manufacturers – MICROCIRCUIT, MEMORY, DIGITAL, CMOS, 32K X 8 STATIC RAM (SRAM), MONOLITHIC SILICON

1. SCOPE
1.1 Scope. This drawing describes device requirements for MIL-STD-883 compliant, non-JAN class level B microcircuits in
accordance with MIL-PRF-38535, appendix A.
1.2 Part or Identifying Number (PIN). The complete PIN is as shown in the following example:
5962-88662
01
X_
A
Drawing number
Device type
(see 1.2.1)
Case outline
(see 1.2.2)
Lead finish
(see 1.2.3)
1.2.1 Device type(s). The device type(s) identify the circuit function as follows:
Device type
Generic number 1/
Circuit function
Access time
01
32K X 8 CMOS SRAM
100 ns
02
70 ns
03
55 ns
04
45 ns
05
35 ns
06
25 ns
07
20 ns
08
15 ns
09
12 ns
1.2.2 Case outline(s). The case outline(s) are as designated in MIL-STD-1835 and as follows:
Outline letter
Descriptive designator
Terminals
Package style
X
GDIP1-T28 or CDIP2-T28
28
Dual in-line
Y
CQCC1-N32
32
Rectangular leadless chip carrier
Z
CDFP3-F28
28
Flat pack
U
CQCC3-N28
28
Rectangular leadless chip carrier
T
CDFP4-F28
28
Flat pack
N
CDIP3-T28 or GDIP4-T28
28
Dual in-line
M
GDFP2-F28
28
Flat pack
1.2.3 Lead finish. The lead finish is as specified in MIL-PRF-38535, appendix A.
1.3 Absolute maximum ratings.
Supply voltage range (V_CC) ---------------------------------------
Input voltage range -------------------------------------------------
Ambient storage temperature ------------------------------------
Thermal resistance, junction-to-case (Θ_JC) ------------------
Junction temperature (T_J) -----------------------------------------
Power dissipation ---------------------------------------------------
Lead temperature (soldering, 10 seconds)--------------------
-0.5 V dc to +7.0 V dc 2/
-0.5 V dc to +6.0 V dc
-65°C to +150°C
See MIL-STD-1835
+150°C 3/
1.0 W
+260°C
1.4 Recommended operating conditions.
Supply voltage range (V_CC) --------------------------------------
Ground voltage (V_SS) ----------------------------------------------
Input high voltage range (V_IH) -----------------------------------
Input low voltage range (V_IL) -------------------------------------
Operating case temperature (T_C) -------------------------------
4.5 V dc to 5.5 V dc 2/
0 V dc
2.2 V dc to V_CC +0.5 V dc
-0.5 V dc to 0.8 V dc
-55°C to +125°C
1/ Generic numbers are listed on the Standard Microcircuit Drawing Source Approval Bulletin and will also be listed in
MIL-HDBK-103.
2/ All voltages referenced to V_SS.
3/ Maximum junction temperature shall not be exceeded except for allowable short duration burn-in screening conditions in
accordance with method 5004 of MIL-STD-883.
STANDARD
MICROCIRCUIT DRAWING
DEFENSE SUPPLY CENTER COLUMBUS
COLUMBUS, OHIO 43218-3990
DSCC FORM 2234
APR 97
SIZE
A
REVISION LEVEL
D
5962-88662
SHEET
2