5638A Datasheet, PDF (2/22 Pages) List of Unclassifed Manufacturers – THE WIDEST RANGE IN MINIATURE SWITCHES

5000 series
Toggle switches
Specifications
ELECTRICAL SPECIFICATIONS
• Current/voltage rating with resistive load :
Contact
Maximum
Minimum
Level*
Silver (A)
3A 250VAC - 6A 125VAC - 4A 30VDC
50mA 10VDC
III and IV
Silver,
3A 250VAC - 6A 125 VAC - 4A 30VDC
gold plated (AD) Gold plating withstands up to 100mA 30VDC
10mA 50mV
10µA 5V
I to IV
A
Brass,
0,4 VA at 20VAC or DC
gold plated (CD)
10mA 50mV
10µA 5V
I and II
• For inductive, lamp or capacitive load, consult factory.
• Initial contact resistance : 10 mΩ max.
• Insulation resistance : 1.000 MΩ min. at 500VDC
• Dielectric strength :
1.000 Vrms 50 Hz min. between terminals
1.500 Vrms 50 Hz min. between poles
1.500 Vrms 50 Hz min. between terminals and frame
• Contact bounce : 2 ms max.
• Electrical life at full load :
50.000 cycles for single and double pole
40.000 cycles for 3 pole
30.000 cycles for 4 pole
• Low level or mechanical life : 100.000 cycles
* For details, see Technical Information, end of catalogue.
MATERIALS
• Case : diallylphthalate (DAP) or
high temperature plastic material
(UL94-V0)
• Actuator : brass, chrome plated
• Bushing : brass, nickel plated
• Housing : stainless steel or steel
tin plated
• Contacts
A : silver
AD : silver, gold plated
CD : brass, gold plated
X814 : for peak currrents, see
section G.
• Terminal seal : epoxy
• Paddles : UL94HB polyamide
• Lever caps : vinyl
GENERAL SPECIFICATIONS
• Torque : 1,25 Nm (.922 Ft.lb) max. applied to nut
• Panel thickness : 2,5 mm (.098) with 2 nuts - 4 mm (.157) with 1 nut
• Operating temperature : -40°C to +85°C
AGENCY APPROVALS/PREFERENTIAL LISTS
CECC 96201-007
EN 61058-1
For VDE, refer to 55000 series.
QPL (Europe only)
MUAHAG
NATO
Availability : consult factory for details of approved models.
Marking : to order switches marked UL, CSA or CECC, complete appropriate
box of ordering format.
Preferential lists do not appear on the switches.
APEM
www.apem.com
A-23