1783680000 Datasheet, PDF (2/5 Pages) List of Unclassifed Manufacturers – OMNIMATE Power - series LX LX 15.00/03/90 4.5SN GY BX

Data sheet...
OMNIMATE Power - series LX
LX 15.00/03/90 4.5SN GY BX
Technical data
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: [phone]
Fax: [phone]
www.weidmueller.com
Dimensions and weights
Net weight
System characteristics
51.05 g
Product family
OMNIMATE Power - series
LX
Mounting onto the PCB
Solder connection
Pitch in mm (P)
15 mm
No. of poles
3
Max. adjacent poles per row
10
Solder pin length (l)
4.5 mm
Solder eyelet hole diameter tolerance (D)+ 0,1 mm
Screwdriver blade
1.0 x 5.5
Tightening torque, min.
2.4 Nm
Clamping screw
M5
L1 in mm
30 mm
Touch-safe protection acc. to DIN VDE
0470
IP 10
Material data
Wire connection method
Conductor outlet direction
Pitch in inches (P)
Fitted by customer
Number of rows
Solder eyelet hole diameter (D)
Number of solder pins per pole
Screwdriver blade standard
Tightening torque, max.
Stripping length
L1 in inches
Touch-safe protection acc. to DIN VDE
57 106
Clamping yoke connection
90°
0.591 inch
No
1
1.6 mm
2
DIN 5264
4 Nm
16 mm
1.181 inch
Safe from finger touch
Insulating material
UL 94 flammability rating
Temperature of glow-wire test
Contact material
Contact base material
Connectable conductors
Wemid (PA)
V-0
960 °C
E-Cu
E-Cu
Colour
CTI
Duration of glow-wire test
Contact surface
Pebble grey
≥ 600
30 s
tinned
Clamping range, rated connection, min. 1.31 mm²
Wire connection cross section AWG,
min.
AWG 16
Solid, min. H05(07) V-U
1.5 mm²
Stranded, max. H07V-R
25 mm²
Flexible, min. H05(07) V-K
1.5 mm²
w. wire end ferrule, DIN 46228 pt 1, min
1.5 mm²
w. plastic collar ferrule, DIN 46228 pt 4,
min.
1.5 mm²
Plug gauge acc. to EN 60999 a x b; Ø 6.9 mm x 6.9 mm
DIN IEC rating data
Clamping range, rated connection, max. 25 mm²
Wire connection cross section AWG,
max.
AWG 4
Solid, max. H05(07) V-U
16 mm²
Stranded, min. H07V-R
6 mm²
Flexible, max. H05(07) V-K
25 mm²
w. wire end ferrule, DIN 46228 pt 1,
max.
16 mm²
w. plastic collar ferrule, DIN 46228 pt 4,
max.
16 mm²
Rated current, min. no. of poles
(TU=20°C)
101 A
Rated current, number of poles
(Tu=40°C), min
101 A
Rated voltage for surge voltage class /
pollution degree II/2
1,000 V
Rated voltage for surge voltage class /
pollution degree III/3
1,000 V
Rated impulse voltage for surge voltage
class/ pollution degree III/2
8 kV
Short-time withstand current resistance 3 x 1s mit 1000 A
Rated current, max. no. of poles
(Tu=20°C)
101 A
Rated current, number of poles
(Tu=40°C), max.
101 A
Rated voltage for surge voltage class /
pollution degree III/2
1,000 V
Rated impulse voltage for surge voltage
class/ pollution degree II/2
6 kV
Rated impulse voltage for surge voltage
class/ contamination degree III/3
8 kV
Creation date May 23, 2013 9:03:30 AM CEST
Catalogue status 27.9.2012 / We reserve the right to make technical changes.
2