RF83 Datasheet, PDF(19/22 Page) List of Unclassifed Manufacturers

English

English German Russian Spanish Italian Polish Chinese Japanese Korean French Portuguese	Language :

RF83 Datasheet, PDF (19/22 Pages) List of Unclassifed Manufacturers – 300~440MHz ASK/OOK Receiver

◁

RF83//RF83C/RF83L/RF83CL ASK/OOK Receiver V2.0

To activate the Wake-Up function, a received constant RF carrier must be present for 128 counts or the

internal system clock. The internal system clock is derived from the reference oscillator and is 1/256 the

reference oscillator frequency. For example:

fT = 6.4MHz

fS = fT/256 = 25kHz

PS = 1/fS = 0.04ms

128 counts x 0.04ms = 5.12ms

Where:

fT = reference oscillator frequency

fS = system clock frequency

PS = system clock period

The Wake-Up counter will reset immediately after a detected RF carrier drops. The duration of the

Wake-Up signal output is then determined by the required wake up time plus an additional RF

carrier on time interval to create a wake up pulse output.

WAKEB Output Pulse Time = TWAKE + Additional RF Carrier on Time

For designers who wish to use the wakeup function while squelching the output, a positive

squelching offset voltage must be used. This simply requires that the squelch resistor be connected

to a voltage more positive than the quiescent voltage on the CTH pin so that the data output is low

in absence of a transmission.

Tel: +86â755â82973805 Fax: +86â755â82973550 Eâmail: sales@hoperf.com http://www.hoperf.com

- 19 -

▷