MKP3382 Datasheet, PDF (17/17 Pages) List of Unclassifed Manufacturers – Interference suppression film capacitors

BCcomponents
Interference suppression film capacitors
Product specification
MKP 338 2
TEST
PROCEDURE
(quick reference)
REQUIREMENTS
Charge and discharge:
“IEC 60384-14”
10000 cycles; 5 ms;
1.5 × dV/dt
|∆C/C| ≤ 10%
∆tan δ ≤ 80 × 10−4 (C ≤ 1 µF); note 2
∆tan δ ≤ 50 × 10−4 (C > 1 µF); note 2
Passive flammability:
“IEC 60384-14”
Active flammability:
“IEC 60384-14”
Heat storage:
“IEC 60384-14”
class B
20 × 2.5 kV discharge
1000 hours; 105 °C
Resistance to soldering heat preheating: 105 °C;
with preheating:
solder bath: 260 °C; 10 s
“IEC 60384-14”
Active flammability test
voltage proof up to 2 × peak impulse
voltage of 4.13 or until breakdown
(100 V/sec, current limited 2mA)
failed capacitors connected to a
250 V_ac power supply during
5 minutes.
R_ins ≥ 50% of specified value
no burning
no burning
|∆C/C| ≤ 5%
∆tan δ ≤ 80 × 10−4 (C ≤ 1 µF); note 2
∆tan δ ≤ 50 × 10−4 (C > 1 µF); note 2
|∆C/C| ≤ 5%
∆tan δ ≤ 80 × 10−4 (C ≤ 1 µF); note 2
∆tan δ ≤ 50 × 10−4 (C > 1 µF); note 2
no burning
Notes
1. For detailed information: see “Type detail specification HQN-384-14/111”.
2. Measuring frequency 10 kHz for C ≤ 1 µF and 1 kHz for C > 1 µF.
2000 Sep 11
17