SA3319 Datasheet, PDF (16/20 Pages) List of Unclassifed Manufacturers – Buccaneer® Connectors

Buccaneer^® Connectors
Mini Buccaneer^® Contact Inserts and Accessories
Specification
Electrical
No Poles:
Current Rating:
Voltage Rating:
Contact Resistance:
Insulation Resistance:
Voltage Proof:
Operating Temp. Range:
Approvals:
Solder/Crimp Terminals
3, 8
5A
380V ac
<5mΩ
>10⁶MΩ @ 500V d.c.
2kV @ 50Hz
–20°C to +70°C
Screw Terminals
2, 3
4
6
10A
6A
3A
250V ac 250V ac 250V ac
BNC
Materials
Body Mouldings:
Inserts:
Contacts:
O Rings:
Solder/Crimp Terminals
Polyamide UL94V-0
Polyamide UL94V-0
Copper Alloy, Gold Plated (0.1µm) on Nickel
Nitrile
Screw Terminals
Brass, Nickel Plated
BNC
Brass, Silver Plated.
Mechanical
Solder/Crimp Terminals
Screw Terminals
BNC
Sealing:
Cable Acceptance
Contact Accomodation:
Insertion Force (typical):
Withdrawal Force (typical):
Tightening Torques
Gland Nut, PX0800, 801:
Rear Nut, PX0802, 803, 804, 805:
Sealing Cap, PX0810, 811:
Protection Classification IP68, BS EN60529:1992. Tested @ 15lb/sq.in. (10m depth) for 2 wks.
5-7mm dia - standard gland
3.5-9mm dia - alternative glands
0.2 - 0.5mm² (20 - 24 AWG)
1mm² max (18 AWG)
50Ω: RG58/CU,
URM43, URM76
75Ω: URM70
3 way: 5N (1.1lbf)
8 way: 14N (3.1lbf)
3 way: 45N (10lbf)
4 way: 50N (11lbf)
6 way: 140N (31lbf)
3 way: 3N (0.66lbf)
8 way: 12N (2.6lbf)
3 way: 32N (7lbf)
4 way: 40N (9lbf)
6 way: 150N (34lbf)
1.13Nm (10lbf in)
0.7Nm min, 1.7Nm max (6.2lbf in min, 15lbf in max)
0.23Nm min, 1.13Nm max (2lbf in min, 10lbf in max)
How To Order
1 Choose Body Type.
2 Determine Contact Carrier Inserts. Choose number poles, and type of
contacts (solder, crimp, screw terminal or BNC).
3 Choose Pins or Sockets. Solder and crimp contacts are supplied
separately in packs of ten.
4 Choose Polarising/Blanking Pins. If required for solder/crimp contact
inserts. Supplied in packs of ten.
5 Contact Insertion Tool (required to load solder/crimp contacts into
inserts).
6 Crimping Tool (if required for crimp contacts).
7 Sealing Cap (if required).
Cable Acceptance
Cable gland for 5-7mm fitted as standard.
Cable
Diameter
5-7mm
3.5-5mm
6-8mm
7-9mm
Gland
Part No.
12023/1
12023/5
12023
12023/2
Gland
Colour
White
Grey
Black
Yellow
Additional
Suffix
Fitted as standard
Suffix /04
Suffix /06
Suffix /07
To order body with alternative cable gland add suffix to part no. e.g.
PX0800/06 = PX0800 body with cable gland to suit 6-8mm dia. cable.
28
Fax: [phone]
Email: [e-mail]