ULCD-32PTU Datasheet, PDF (15/21 Pages) List of Unclassifed Manufacturers – 3.2” microLCD PICASO Display

4D SYSTEMS
µLCD-32PTU
Once the μLCD-32PTU is configured and
downloaded to from the Serial Environment, simple
graphic commands can be sent from the users host
microcontroller to display primitives, images, sound
or even video.
Refer to the “Serial Command Set Reference
Manual” from the Workshop 4 product page on the
4D Systems website for a complete listing of all the
supported serial commands
By default, each module shipped from the 4D
Systems factory will come pre-programmed ready
for use in the Serial mode.
11. Starter Kit
4D Systems highly recommends all first time buyers
of 4D Systems’ displays, to purchase the Starter Kit
when purchasing their first 4D Systems display
solution.
The Starter Kit provides all the hardware that is
required to get the user up and running.
Not all development environments and features
will be needed by every user, however by
purchasing the display solution in a Starter Kit, it
ensures that if you want to take full advantage of
the 4D Systems display solution and try out each of
the 4D Workshop4 Environments, upgrade
PmmC/firmware, you can.
The Designer environment can utilise every feature
of the display, however depending on the user
requirements, a micro-SD (μSD) card may not be
required. The μSD card is used when displaying
images/video/sound, along with datalogging to
μSD, and a programming cable is definitely required
for downloading compiled code and
PmmC/Firmware updates.
The ViSi environment is the same as Designer in
terms of feature utilisation, but is image based so
requires a μSD card, along with a programming
cable.
The ViSi-Genie environment is also image based,
and therefore requires a μSD card and
programming cable also.
The Serial environment does not require either a
μSD or Programming cable to be used, however can
utilise both depending on the user requirements.
The μSD card can be used for such things as storage
of multimedia files and datalogging, and the
Programming cable for PmmC/Firmware updates,
or changing to one of the other three programming
environments.
The Starter Kit includes:
 4D Programming Adaptor or Cable
 2Gb micro-SD Card
 5 way cable for easy connection to a
breadboard or host
 Display Module
 Quick Start Guide
Simply select the Starter Kit option when
purchasing the chosen display module on the 4D
Systems shopping cart, or from your local
distributor.
© 2014 4D SYSTEMS
Page 15 of 21
www.4dsystems.com.au