SI8540 Datasheet, PDF (15/18 Pages) List of Unclassifed Manufacturers – HIGH-SIDE CURRENT SENSE AMPLIFIER

Si8540
8. Land Pattern: SOT-23
Figure 13 illustrates the recommended land pattern details for the SOT-23 device. Table 6 lists the values for the
dimensions shown in the illustration.
Figure 13. SOT-23 Land Pattern
Table 6. SOT-23 Land Pattern Dimensions
Dimension
(mm)
C
2.70
E
0.95
X
1.05
Y
0.60
Notes:
General
1. All dimensions shown are in millimeters (mm) unless otherwise noted.
2. Dimensioning and Tolerancing is per the ANSI Y14.5M-1994 specification.
3. This Land Pattern Design is based on the IPC-7351 guidelines.
4. All dimensions shown are at Maximum Material Condition (MMC). Least Material Condition
(LMC) is calculated based on a Fabrication Allowance of 0.05 mm.
Card Assembly
5. A No-Clean, Type-3 solder paste is recommended.
6. The recommended card reflow profile is per the JEDEC/IPC J-STD-020D specification for
Small Body Components.
Rev. 1.2
15