RFM68W Datasheet, PDF (15/20 Pages) List of Unclassifed Manufacturers – Low Cost ISM Transmitter Module

RFM68W
RFM68W
5.4. Test Parameters (internal)
Ten Test bits DT(9:0) exist in the RFM68W. They are only use for the industrial test of the device, and therefore they are pad
protected. It means that their value cannot be modified without applying a specific logical level to some of the RFM68W
pads during a write access.
5.5. Status Parameters
DS(12:5) are read-only bits, organized as follows:
Name
RES
Chip
Version
RES
Number
Description
DS(28:13) Reserved
DS(12:5) Chip identification number
Default
Advanced
Mode
Power
&Go 1
Power
&Go 2
-
“0001 0001” --> V1A
DS(4:0) Reserved
-
Table 12 Status Read-Only Parameters
15
Tel: [phone] Fax: [phone] E-mail: [e-mail] http:/ / www.hoperf.com