RF68 Datasheet, PDF (15/21 Pages) List of Unclassifed Manufacturers – Low Cost Integrated Transmitter IC

RF68
5.4. Test Parameters (internal)
Ten Test bits DT(9:0) exist in the RF68. They are only use for the industrial test of the device, and therefore they are pad
protected. It means that their value cannot be modified without applying a specific logical level to some of the RF68 pads
during a write access.
5.5. Status Parameters
DS(12:5) are read-only bits, organized as follows:
Name
RES
Chip
Version
RES
Number
Description
DS(28:13) Reserved
DS(12:5) Chip identification number
Default
Advanced
Mode
Power
&Go 1
Power
&Go 2
-
“0001 0001” --> V1A
DS(4:0) Reserved
-
Table 12 Status Read-Only Parameters
Page 15
Tel: [phone] Fax: [phone] E-mail: [e-mail] http:/ / www.hoperf.com