DG24064-2-S1RB Datasheet, PDF (15/16 Pages) List of Unclassifed Manufacturers – SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY MODULE

5. Notes
SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY MODULE
MODEL NO. DG24064-2-S1RB
Safety
• If the LCD breaks, be careful not to get the liquid crystal in
your mouth. If the liquid crystal touches your skin or clothes,
wash it off immediately using soap and water.
Handling
• Avoid static electricity as this can damage the CMOS LSI.
• The LCD panel is plate glass, do not hit or crush it.
• Do not remove the panel or frame from the module.
• The polarizing plate of the display is very fragile, handle it very
carefully.
Mounting and Design
• Mount the module by using the specified mounting part and
holes.
• To protect the module from external pressure, leave a small gap
by placing transparent plates (e.g. acrylic or glass) on the
display surface, frame and polarizing plate.
• Design the system so that no input signal is given unless the
power supply voltage is applied.
• Keep the module dry. Avoid condensation; this can cause the
transparent electrodes to fail.
Storage
• Store the module in a dark place where the temperature is
25°C±10°C and the relative humidity is below 65%.
• Do not store the module near organic solvents or corrosive
gases.
• Do not crush, shake, or jolt the module (including accessories).
Cleaning
• Do not wipe the polarizing plate with a dry cloth, it may scratch
the surface.
• Do not use ketonic solvent (ketone and acetone) or aromatic
solvents (tolulene and xylene); they may damage the polarizing
plate.
• Wipe the module surface gently using a soft cloth soaked with
petroleum benzene.
DATA VISION
02/16/00
15/ 15