UG132 Datasheet, PDF (13/16 Pages) List of Unclassifed Manufacturers – CPT007B SLEXP8007A Kit

UG132: CPT007B SLEXP8007A Kit User's Guide
Simplicity Studio
7.2 Capacitive Sense Profiler
The [Capacitive Sense Profiler] in Simplicity Studio displays touches, raw and processed data, and noise information in a simple-to-
use GUI. Touch and release any of the capacitive sensing peripherals on the board and the profiler will display the data in a table and
as a graph over time.
To access and setup the [Capacitive Sense Profiler] in [Simplicity Studio]:
1. Provide power to the board by connecting the USB connector to the PC using the provided USB cable.
2. Click the [Refresh detected hardware] button and select the [CPT007B] kit under [Detected Hardware].
3. Go to [Tools] and select the [Capacitive Sense Profiler] tile.
4. In the [Control Panel], click [Use Device...] .
Once the board is connected, touch and release any of the capacitive sensing touch peripherals on the board to view the raw and pro-
cessed data. The profiler can view the data as [Raw Data], [Noise], and [Buttons]. The Buttons view is particularly useful since it
shows the state of the capacitive sense touch pads as either on or off.
More information about [Capacitive Sense Profiler] is available in AN0829: "Capacitive Sensing Library Configuration Guide." Applica-
tion notes can be accessed within Simplicity Studio using the [Application Notes] tile or on the Silicon Labs website (www.silabs.com/
interface-appnotes).
Figure 7.3. Simplicity Studio Capacitive Sense Profiler
silabs.com | Smart. Connected. Energy-friendly.
Rev. 0.1 | 12