HT-170USD Datasheet, PDF (12/23 Pages) List of Unclassifed Manufacturers – Harvatek Surface Mount LED Data Sheet

Top-emitting 0805 (2013)
HT-170 Series
Precaution for Use
1. The chips should not be used directly in any type of fluid such as water, oil, organic
solvent, etc.
2. When the LEDs are illuminating, the maximum ambient temperature should be first
considered before operation.
3. LEDs must be stored in a clean environment. A sealed container with a nitrogen
atmosphere is necessary if the storage period is over 3 months after shipping.
4. The LEDs must be used within seven days after unpacked. Unused products must
be
repacked in an anti-electrostatic package, folded to close any opening and then
stored in
a dry and cool space.
5. The appearance and specifications of the products may be modified for
improvement
without further notice.
6. The LEDs are sensitive to the static electricity and surge. It is strongly
recommended to
use a grounded wrist band and anti-electrostatic glove when handling the LEDs.
If a voltage over the absolute maximum rating is applied to LEDs, it will damage
LEDs.
Damaged LEDs will show some abnormal characteristics such as remarkable
increase
of leak current, lower turn-on voltage and getting unlit at low current.
Official Product
Tentative Product
Product: HT-170 Series
****************
Specifications are subject to change without notice. Data and
drawings herein are copyrighted.
MAR. 27, 2012
Version of 1.2
Data Sheet No.
HT-170 Series
Page 12/23