EPM-PS1 Datasheet, PDF (12/22 Pages) List of Unclassifed Manufacturers – The EPM-PS1 is a DC switching power supply designed for high reliability in a wide variety of applications.

Physical Description
HARDWARE ASSEMBLY
The EPM-PS1 uses PC/104 and PC/104-Plus connectors so that expansion modules can be added
to the top of the stack. PC/104 (ISA) modules must not be positioned between the EPM-PS1 and
any PC/104-Plus (PCI) modules on the stack.
The entire assembly can sit on a table top or be secured to a base plate. When bolting the unit
down, make sure to secure all four standoffs to the mounting surface to prevent circuit board
flexing. Standoffs are secured to the top circuit board using four pan head screws. Standoffs and
screws are available as part number VL-HDW-101.
An extractor tool is available (part number VL-HDW-203) to separate the PC/104 modules from
the stack. Use caution when using the extractor tool not to damage any board components.
STACK ARRANGEMENT EXAMPLE
Figure 4. Stack Arrangement Example
EPM-PS1 Reference Manual
8