USB2-H-1016-M Datasheet, PDF (11/38 Pages) List of Unclassifed Manufacturers – USB2-H-100X-M FAMILY Hi-Speed USB to Multi-Ports RS232 Adapter

Document Reference No.: ES_000057
USB2-H-100X-M FAMILY Hi-Speed USB to Multi-Ports RS232 Adapter Data Sheet
Version 1.0
Clearance No.: ES #43
The DE-9P connector is configured in an industry standard (TIA/EIA-574) pin-out to provide connection
to RS232 peripherals through standard cables. See section 3.1.2
5mm Terminal Block
The 5mm terminal block connectors provide the connection to RS232 peripherals devices and can be
used instead of the DE-9P connector shared by the same port.
+5V DC Output Switch
The switch can be used to disable/enable the +5VDC output to an external application.
Main Board
This is used on 4 and 16 ports product. When product is 4-ports that use a main board, when product is
16-ports product that use two main boards.
Daughter board
This is used on 8 and 16 ports product. A single daughter board is used for 8-port adapters. Two
daughter boards are use for 16-port adapters.
1.4 Features
RS-232 serial ports by connecting to Hi-Speed USB 2.0 interface.
Easy plug & play installation and RS-232 device connection
Provide USB2.0 Hi-Speed (480Mbps) interface and works with USB 1.1 & 2.0 Host and Hub ports
Industry Standard FTDI chip set & device drivers for maximum compatibility
Microsoft Windows^® WHQL-certified, Mac OS X, Linux and Windows CE device drivers
Installs as standard Windows COM ports
COM port number can be changed to any available COM port number, to support HyperTerminal,
or any other serial communications software application running in Windows
FIFO: USB2-H-1004/1008/1016-M - FT4232H 2K byte transmit buffer, 2K byte receive buffer
USB2-H-1002-M - FT2232H 4K byte transmit buffer, 4K byte receive buffer
USB2-H-1001-M - FT232H 1K byte transmit buffer, 1K byte receive buffer
RS-232 data signals: TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND
Single, dual and quad Ports product are Powered by USB port. No external power adapter is
required. Note that they can also be powered from external power adapter.
Serial port speed up to 1Mbps
Serial Communication Parameters
o Parity: None, Even, Odd
o Data bits: 7, 8
o Flow control: RTS/CTS , DTR/DSR, X-ON/X-OFF, None
Standard DE-9P male connectors
LEDs indicate USB Enumeration, RxD, TxD for monitoring port status & easy diagnostics
Operating temperature of -40°C to +85°C
©2012 EasySYNC Ltd.
11