USB2-F-1001 Datasheet, PDF (11/28 Pages) List of Unclassifed Manufacturers – USB2-F-1001 Full-Speed USB to 1-Port RS232 Adapter

Document Reference No.: ES_000004
USB2-F-1001 Full-Speed USB to 1-Port RS232 Adapter Data Sheet Version 1.1
Clearance No.: #72
Figure 2.5 – Automatic Install
5) Wait while the driver is found, downloaded, and installed. This step may take a couple minutes
depending on the Internet speed.
6) After the files are found and installed, click “Finish” to complete the installation.
Figure 2.6 - Complete Hardware Installation
7) Steps 2 through 6 will repeat. The first time installs the basic USB Serial Converter in the USB
device tree. The second time installs the Virtual COM Port layer in the Ports tree and assigns the
COM port number.
8) When both portions of the device driver have been installed successfully, the following message
will appear, indicating that the device is ready.
Figure 2.7 - Hardware Ready
COM Port Assignment
Next, to determine which COM port has been assigned, open the Windows Device Manager from the
System Control Panel.
©2009 EasySync Ltd.
11